Influence of process parameters on torsional strength, impact toughness and hardness of dissimilar AISI 304 and AISI 1021 friction welded steels
Journal Title: Materials Engineering - Materialove inzinierstvo (MEMI) - Year 2014, Vol 21, Issue 3
Abstract
In this present study an attempt was made to join austenitic stainless steel (AISI 304) with low alloy steel (AISI 1021) at different rotational speeds and at different axial pressures and then determining the strength of the joint by means of mechanical properties such as torsional strength, impact strength and micro hardness. The experimental results indicate that the rotational speed and the axial pressure have a significant effect on the mechanical properties of the joint and it is possible to improve the quality of the joint by selecting the optimum parameters.
Authors and Affiliations
Amit Handa, Vikas Chawla
Keywords
Related Articles
- EP ID EP95020
- DOI -
- Views 127
- Downloads 0
THE QUALITY OF MATERIALS APPLIED FOR SLEWING BEARING RACEWAY – TECHNICAL PAPER
Selected slewing bearings and their application have been described in this article. Basic causes of the damage pitch surfaces of slewing bearings have been analyzed and examples of the damage have been presented as well...
CHARACTERIZATION OF PHASES IN SECONDARY AlZn10Si8Mg CAST ALLOY
Using recycled aluminium cast alloys is profitable in many aspects. Requiring only 5 % of the energy to produce secondary metal as compared to primary metal and generates only 5 % of the green house gas emissions, the re...
MICROSTRUCTURE EVOLUTION OF PURE TITANIUM DURING ECAP
The main goal of the presented paper was to describe deformation behaviour of the commercial purity titanium during the ECAP method. Attention was paid particularly on reached mechanical properties of above mentioned mat...
NODULAR CAST IRON FATIGUE LIFETIME IN CYCLIC PLANE BENDING
The fatigue behavior of a component is strongly dependent also on the material and its surface condition. Therefore, the manner in which the surface is prepared during component manufacturing (surface roughness, re...
Microstructural changes of AISI 316L due to structural sensitization and its influence on the fatigue properties
Mechanical and fatigue properties of material are dependent on its microstructure. The microstructure of AISI 316L stainless steel commonly used for the production of medical tools, equipment and implants can be easily i...