Investigating a problem from the theory of elasticity for a half-space with cylindrical cavities for which boundary conditions of contact type are assigned
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 4, Issue 7
Abstract
<p>When designing spatial structures, it is necessary to know the stressed-strained state of a body. These problems include the calculation schemes, in which there is a half-space with cylindrical cavities, at the boundaries of which the contact type conditions are assigned. The segment of such problems is not enough researched and requires further attention.</p><p>The analytical and numerical algorithm for solving a special problem of the theory of elasticity for a half-space with cylindrical cavities was proposed in this paper. Radial displacements and tangential stresses are assigned at the boundaries of cavities, and one of the two types of the boundary conditions – displacement or stress – is assigned at the half-space boundary. Calculations revealed the stressed-strained state of the half-space.</p><p>Under the fixed geometrical conditions, a numerical analysis of the three variants of the problem, when displacements are assigned at the half-space boundary, and of the tree variants of the problem, when stresses are assigned at the half-space boundary, was conducted. A comparative analysis of the variants with different boundary conditions was carried out.</p><p>It was found that at the boundary conditions of the contact type, assigned at the boundaries of cylindrical cavities, if the assigned displacement function and the assigned function of stresses are the same, the boundary conditions at the half-space boundary in the form of stresses have more influence of the stressed state that boundary conditions in the form of displacements. It was also established that at different kinds of the assigned boundary conditions (stresses or displacements), stresses o and on the surface of applying such conditions change for the opposite, that is, from stretching to compressing and vice versa.</p><p>The presented analysis can be used during designing the structures, in the calculation schemes of which there is a half-space boundary with boundary conditions of the contact type, assigned on it, and cylindrical cavities, on the surfaces of which displacements and stresses are assigned.</p>
Authors and Affiliations
Vladimir Protsenko, Vitaly Miroshnikov
Keywords
Related Articles
- EP ID EP528095
- DOI 10.15587/1729-4061.2018.139567
- Views 58
- Downloads 0
Analysis of the technology to manufacture a high-temperature microstrip superconductive device for the electromagnetic protection of receivers
<span lang="EN-US">Technological features of the process of manufacturing a high-speed high-temperature superconducting microstrip protective device which can reduce in a picosecond period (the time of switching or opera...
Theoretical study of the dispersion effects occurring at optical fiber connections
<p>Processes of redistribution of optical signal energy between the optical fiber core and shell in connection points were studied. Closed formulas of dependence of the signal length at the receiving side on the number o...
Modeling of the process of the shot based on the numerical solution of the equations of internal ballistics
<p>The study of the process of firing a firearm, taking into account the degree of wear of the barrel, requires an assessment of the losses of powder gases due to their breakthrough between the barrel walls and the proje...
Enrichment on Bangka tin slag’s tantalum and niobium oxide contents through non-fluoride process
<p>This research explored how non-fluoride solutions including 8M NaOH, 0.8, 1.6 and 2.4 M H<sub>2</sub>SO<sub>4</sub>, and 0.1, 0.4 and 0.8 M HClO<sub>4 </sub>increased the contents of tantalum and niobium oxide through...
Prediction of the electrical resistance of multilayer carbon fiber composites
<p>The issues of calculation of electrical phenomena in multilayer carbon fiber composite materials are considered. The method for assessing the reliability of composite material models for modeling electrical phenomena...