Investigation of the Effect of Pile Height and Yarn Linear Density on the Performance Properties of Pile Loop and Cut-Pile Loop Knit Fabrics
Journal Title: Fibres and Textiles in Eastern Europe - Year 2016, Vol 24, Issue 1
Abstract
This paper investigates the effects of fabric structural parameters such as pile yarn linear density (19.7, 22.7 and 24.6 tex), ground yarn linear density (100 and 78 dtex), sinker height (2.2 sinker; 2.5 sinker and 2.8 sinker) on the performance properties of pile loop and cut-pile loop knit fabrics. The effects of structural parameters on the performance properties of the fabrics, such as abrasion resistance, bursting strength, and air permeability, were analysed. To determine their relationship and significance, ANOVA and Pearson correlation analysis were conducted. A higher pile height increases the fabric surface weight and thickness, thereby improving the abrasion resistance of the fabrics. The bursting strength of the fabrics increases with thicker ground yarn. The thicker pile yarn decreases the air permeability of the fabrics. Pile loop knit fabrics have higher abrasion resistance and lower air permeability compared to cut-pile loop knit fabrics. There is not much difference between the bursting strength of pile loop and cut-pile loop knit fabrics if the linear density of ground and pile yarn is the same.
Authors and Affiliations
Seval Uyanik
Keywords
Related Articles
- EP ID EP201083
- DOI -
- Views 82
- Downloads 0
Optimization of the Sizing Process with Grey Relational Analysis
The sizing process is an important one for textile mills and affects the efficiency of the loom machine. In this study, the optimisation of multiple performance characteristics based on the grey relations analysis met...
Badania przędz modyfikowanych procesami PVD
W publikacji przedstawiono metodę wytwarzania powłok metalicznych na przędzach odcinkowych i ciągłych przy zastosowaniu procesów PVD, co umożliwiło wytworzenie przędz o właściwościach elektroprzewodzących. Zbadano właści...
Influence of Rib Structure and Elastic Yarn Type Variations on Textile Piezoresistive Strain Sensor Characteristics
Production parameters have been established to play a fundamental role in dictating the physical characteristics and sensing properties of knitted sensors. This research studied the influence of yarn type and rib fabric...
Ozonizacja – ekologiczna metoda utleniania bawełny
Badano oksydacje celulozy za pośrednictwem ozonu. Jest to metoda uważana jako ekologiczna w porównaniu do innych stosowanych w przemyśle metod oksydacji. Tego rodzaju obróbka stosowana jest w różnego rodzaju procesach ta...
Directions of the Finishing of Fibres and Textile Development
The development of textile finishing techniques and technologies outside of reports in world-wide publications is also very visible at subsequent fairs. At international fairs, such as ITMA, ATMA and FESPA, machine, equi...