INVESTIGATION OF THE INFLUENCE OF OPERATING PREPARATIONS ON THE CHANGE OF THE LUBRICATING PROPERTIES OF OILS AND THE TRIBOLOGICAL PROPERTIES OF CAST IRON
Journal Title: Tribologia - Year 2010, Vol 234, Issue 6
Abstract
This paper presents the results of the influence of operating preparations on the changes of the lubricating properties of oils and the tribological properties of cast iron. A synergy of the technological addition of operating preparations was analysed, as well as their influence on the surface friction, based on stereometry and the scanning microscopy image analysis.<br/><br/>
Authors and Affiliations
Stanisław Laber, Mariusz Jenek
Keywords
Related Articles
- EP ID EP517200
- DOI -
- Views 38
- Downloads 0
INVESTIGATION METHODS FOR ROLLING BEARINGS IN TERMS OF CURRENT REQUIREMENTS FOR HIGH PERFORMANCE PRODUCTS
As a result of the development in machine design, progress investigation in rolling bearing production is necessary. The criteria for bearings dictate the production of bearings for specific applications. This requires a...
HYDRODYNAMIC THRUST BEARINGS WITH POLYMER LINING
Polymeric linings of sliding surfaces of the hydrodynamic bearings have been used successfully for over 50 years. Despite of their long history of operation and research, they have not become widespread in industrial app...
METODA OCENY TRWAŁOŚCI POWŁOK MALARSKICH PODDANYCH ODDZIAŁYWANIU MASY MINERALNEJ
W pracy omówiono problemy dotyczące usterek pasywnych powłok malarskich. Zidentyfikowano 4 przyczyny ich powstawania: konstrukcyjne, technologiczne, eksploatacyjne i zużyciowe. Omówiono znormalizowane metody oceny jakośc...
EFFECT OF EXTERNAL LOAD ON THE PROCESS OF STEEL CONSUMPTION IN A SOIL MASS
This paper presents the results of a study on the effect of external load on the course and intensity of Hardox Extreme hardness steel wear in sandy soil. The research was conducted under laboratory conditions using a ro...
PROPERTIES OF DUPLEX LAYERS PRODUCED IN THE VACUUM TITANIZING PROCESS ON TOOL STEEL COVERED WITH NICKEL ALLOY
The paper presents the results of examinations of the structure and properties of duplex layers of the TiC+(Ni-Mo) type, produced in the vacuum titanizing process on tool steel covered with Ni-Mo electrolytic alloy. A co...