Investigation of the Noise at the Limit of Functional Zones
Journal Title: Romanian Journal of Acoustics and Vibration - Year 2012, Vol 9, Issue 1
Abstract
Within the context of sustainable development and environmental protection, a special concern is addressed to the study of noise generation and propagation in the environment. An important contribution to the noise generated in the urban environment has the noise produced by different functional zones. In this paper we present an investigation of the noise at the limit of some functional zones from Timişoara City. We investigate sources and characteristics of the generated noise, propagation way, noxious effects and admissible limits. In order to characterize this noise, measurements were performed in points located near the most important functional zones. Bruel & Kjaer Sound Level Meters were used, which allowed identifying and recording the most important characteristics of the noise. Results of the measurement were processed, analyzed, interpreted and compared with admissible values defined by standards.
Authors and Affiliations
Nicolae HERIŞANU, Vasile BACRIA
The Sound Distribution Uniformity Throughout the Multifunctional Hall „EUTHERPE”
In order to perform a full estimation of acoustic characteristics of public auditoriums there were defined „acoustic criteria” such as reverberation time, clearness index, intelligibility percent, uniformity index etc. T...
Methods of Simulation for Dynamic Systems with Friction
In this paper the contact/impact between two bodies is accentuated by simulations using the ANSYS code. In the present study has been selected the ANSYS/LS-DYNA code because it is used in the simulation of contact/impact...
Finite Elements Simulations of Noise Damping in a Muffler
This study represents an investigation of the COMSOL Finite Elements (FE) capabilities of simulating noise reduction techniques. This general purpose FE code has an acoustics module, from which the present study investig...
The Influence of Linear Dissipation in the Hunting Motion Stability of Wheel Set with Elastic Joints System
The hunting motions it’s a lateral movement of the railway vehicles is a consequence of the reversed conic shape of the rolling surfaces. The stability is an important dynamic problem for vehicle system that determines t...
INTERESTING CONFERENCES THAT WE RECOMMEND
CNMSAV XXXVII, ICSV20, SysStruc '13