INVESTIGATION OF VARIOUS FACTORS INFLUENCE ON DYNAMIC LOAD OF MECHANICAL SYSTEM BY PNEUMATIC COUPLING APPLICATION
Journal Title: Scientific Journals of Silesian University of Technology. Series Transport - Year 2012, Vol 2012, Issue 76
Abstract
In order to tuning or continuous tuning of torsional oscillating mechanical systems (TOMS) during their operation we apply the pneumatic flexible shaft couplings in these systems. By appropriate gaseous medium pressure change in given couplings we change their torsional stiffness and thus the dynamics of the whole system too. Rapid gas pressure increase in the pneumatic coupling during system operation can under certain conditions excite additional dynamic load, what we in final consequence understand as an external faulty event of the system. Therefore, the objective of this paper will be the investigation of various factors influence (viscous damping coefficient, inflation time, twist angle of the coupling and mass moment of inertia of the load) on given faulty event of the system, based on measurements and mathematical modeling.
Authors and Affiliations
Jaroslav HOMIŠIN, Matej URBANSKÝ, Peter KAŠŠAY
METHOD OF MEASUREMENT OF THE PRESSURE IN HYDRAULIC AND PNEUMATIC SYSTEMS WITH LASER BEAM APPLICATION
In the paper, non-contact method of measurement of the pressure with laser beam application is described. Actual solution associated with the topic is shown. Theoretical background of the introduced method is presented i...
PROTOTYPOWY, HYDRODYNAMICZNY MINIGENERATOR ENERGII ELEKTRYCZNEJ DO PRACY W PRZEPŁYWIE KANAŁOWYM
W pracy przedstawiono analizę numeryczną i badania prototypowych rozwiązań minigeneratorów energii elektrycznej projektowanych do montażu w rurociągach o niewielkich średnicach. Zaprezentowano konstrukcję stanowiska bada...
BADANIA MODELOWE UKŁADU AKTYWNEJ WIBROIZOLACJI KABIN MASZYN ROBOCZYCH
W pracy przeprowadzono symulacje komputerowe mechatronicznego mode-lu suwnicy pomostowej, którego przeznaczeniem jest teoretyczna ocena możliwości elimina-cji drgań mechanicznych oddziałujących na kabinę operatora maszyn...
SELECTED DESIGNING ISSUES OF INNOVATIVE MEANS OF TRANSPORT ADAPTED TO PEOPLE WITH LIMITED PHYSICAL ABILITY
. Nowadays, the challenge for transport designers is to ensure more mobility and participation in social life of elderly and disabled people, because of the systematic increase of this group. The selected issues regardin...
DISTRIBUTION OF STRESSES/STRAINS IN CAST IRON–COMPOSITE CONTACT IN LUBRICATED CONDITIONS BY MEANS OF FEM
In this paper presented model occurring in piston ring – cylinder linear and piston – cylinder liner. The materials in these contacts were made from composites and casts iron. The real shape and size of reinforcement pha...