Investigation on lineworks printed with different types of flexographic printing forms for purposes of printed electronics
Journal Title: Challenges of Modern Technology - Year 2015, Vol 6, Issue 3
Abstract
Nowadays one can observe fast development of materials and technologies dedicated to inexpensive mass production of electronic devices with conventional printing techniques. One of them is flexography. In this paper investigation on quality of lineworks printed with flexographic printing technique for purposes of printed electronics is presented. There was analysed influence of different printing forms on printed elements reproduction accuracy. Results obtained with conventional graphic ink with commercially available conductive ink were compared as well. Aspects which should be taken under consideration when implementing flexography to printed electronics applications have been specified.
Authors and Affiliations
Juliusz Krzyżkowski, Tomasz Dąbrowa, Jacek Hamerliński, Przemysław Śleboda
Keywords
Related Articles
- EP ID EP203132
- DOI -
- Views 81
- Downloads 0
Reactive extraction of citric acid using supercritical CO2 and trioctylamine
The paper is dedicated to the integrated process of the reactive extraction of citric acid from aqueous solution using supercritical CO2 and trioctylamine. The aim of this study is to investigate the influence of process...
Floodlighting luminaire for homogeneous illumination
The main subject of the research is a proposition of a luminaire optical system which allows us to illuminate building facades in a more uniform way than it is today in the case when luminaire location is close and asymm...
Investigation of mechanical properties of a rigid body in magnetic levitation state
Levitation (from Latin levitas - lightness) is the process in which an object is suspended by a physical force against gravity, in a stable position without solid physical contact. The phenomenon of levitation, caused by...
Application of finite element method for the analysis of a prefabricated post-and-core – tooth system
In recent years in the area of prosthetic treatment, great emphasise was put on leaving a residual dentition inside mouth. In a teeth after endodontic treatment or with broken crown a healthy root is a natural implant th...
Effect of Flow Pulsations on the Accuracy of Differential Pressure Flowmeters
This work deals with investigation of influence of flow pulsation on the accuracy of gas flow rate and volume measurement by means of the differential pressure flow meters. Experimental studies of the step response curve...