Latest Advancements In Carbon Based Fiber, A Review
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 4
Abstract
Universal interest in Carbon fiber composites are reflected in manufacturing capability that is increasing day by day. Carbon fiber reinforced polymers (CFRPs) are one the stiffest and lightest composite materials. They are much persuading than other traditional materials. Carbon fibers are from the family of advanced composites materials. This paper is mainly related to the research and development stages of carbon fiber of last few years. Two most predominant precursors are e.g. (Polyacrylonitrile (PAN), Mesophase Pitch (MP)) are in carbon-fiber industry. The structure of Carbon fiber and composition of utilized precursors is directly related with properties of resultant carbon fiber. The production processes of carbon fibers are same and according to requirement, different precursors are used for different processing conditions. This paper represents the review related with various process optimizations, and also tries to cover the study on some other precursor materials development, mostly for the cost reduction. Moreover, carbon fiber composites fabrication techniques, applications and properties are also discussed herewith.
Authors and Affiliations
Manpreet Singh, Vinod Kumar
Keywords
Related Articles
- EP ID EP240616
- DOI -
- Views 122
- Downloads 0
The Determination of Collision Bulkhead Position by using Consideration of Ship Grounding Analysis
The ship collision case is an accident involving ship to ship damage or a ship damage only. An approach carried out to determine the effect of ship collision is by using numerical methods. Usually, an experiment method i...
Study the Effects of Carbon Nano Tubes on Corrosion Behavior of Ni-Pelectro-Less Coating of Low Alloy Steels in Salt Water
The basic aim is to study the resistance of corrosion and hardness of heat treatment of coatings with electro-less NiP-CNT. Various concentration of CNTs ranging, 0, 0.1, 0.2 and 0.4g/L in Ni-P-CNT composite was deposite...
The Numerical Simulation and Evaluation of Aircraft Engine Axial Flow Turbine using Numerical Techniques
This research aims to improve the efficiency of an axial flow turbine by improving the boundary conditions. In the baseline paper, Sherwood number, Nusselts number for a given flow were determined. The pressure ratio was...
A Formability of Two Copper-Bearing, Cold Rolled, Box Annealed and Temper Rolled Extra-Deep Drawing Low Carbon Aluminium-Killed Steel Sheets of Nagarjuna Steel Limited (Private, Andhra), and a Comparison with that of a Typical Steel Sheets Made by Bokaro Steel Plant (Steel Authority of India Limited, Ministry of Steel, Government of India)
This market-driven research publication is on the formability of two extra-deep drawing (EDD) steels in whose manufacture scrap addition is present and their chemistry may in turn show the presence of residual copper. It...
Investigating the Effect of the Various Stiffness Coefficient on the Controlled Damper Mass Spring System Based on the Electromechanical Sensor
This work is concerned with investigation the effect of the stiffness coefficient for the spring elements in the mechatronics applied system consists of damper mass spring system linked to the electrical position sensor....