Machinability of modified AlSi7Mg0,3 alloy
Journal Title: Production Engineering Archives - Year 2014, Vol 0, Issue 2
Abstract
Al Alloys have an important position in the industry, mainly in the automotive and aerospace industries. One important group is silumins (Al-Si alloys). Al-Si alloys are the leading casting alloys based on aluminum. Machining of aluminum alloys is currently frequently used and it is an important area of production. This paper deals with an experiment that was conducted at the Faculty of Production Technol-ogy and Management, University of Jan Evangelista Purkyně in Ústí nad Labem, where alloy AlSi7Mg0,3 was experimented upon. Samples were made for processing from the master alloy AlSi7Mg0,3, subsequently unmodified and modified of Sr, Ca and Sb. This paper describes the evaluation of hardness, chip and tool wear in terms of how modification by Sr, Ca and Sb may affect analytical values.
Authors and Affiliations
Jaroimír Cais, Nataša Náprstková
Keywords
Related Articles
- EP ID EP165927
- DOI -
- Views 81
- Downloads 0
THE OSH MANAGEMENT SYSTEM IN THE "SMALL-SIZED" PRODUCTION COMPANY
In the article the problem with systemic management of safety in the smallest production entities has been shown. The effect of health and safety management system and the benefits resulting from it for the most numerous...
Morphology of intermetallic phases in Al-Si cast alloys and their fracture behaviour
Applications of Al-Si cast alloys in recent years have increased especially in the automotive industry (dynamic exposed cast, en-gine parts, cylinder heads, pistons and so on). Controlling the microstructure of secondary...
Change of internal friction on aluminium alloy EN AC 51200 depending on temperature
The article is focused on the analysis of changes in the dependence on temperature on the aluminium alloy EN AC 51200 (10,1% Mg, 1,32% Si and 0,43% Mn) by internal friction. Internal friction is a property of the materia...
THE ASSESSMENT OF CASTINGS QUALITY USING SELECTED QUANTITATIVE METHODS
Aluminium alloys represent an important category of materials due to their high technological value and wide range of applica-tions. The alloys of the Al-Si-Cu system have become increasingly important in recent years, m...
Vibration Diagnostics as an effective Tool for Testing Engines of Internal Combustion
There are several methods of automotive diagnostics used in services to detect a large variety of faults and damages of various parts of engines of internal combustion. Undoubtedly, they are effective, but they are simpl...