MATHEMATICAL MODEL AND CONTROL ALGORITHM OF AN UNREGULATED WIND TURBINE AND IEIG-BASED ISOLATED ENERGY SYSTEM
Journal Title: Електромеханічні і енергозберігаючі системи - Year 2018, Vol 3, Issue 43
Abstract
Purpose. To develop the mathematical model and control algorithm of a stand-alone unregulated wind turbine energy system with inverter excited induction generator, dc main load and auxiliary switched dump load. Methodology. We have integrated the system time domain structural element models for obtaining the complete system model, have used backstepping control design procedure for developing the control algorithm, and have performed simulation modeling to test the behavior of the system. Results. We have developed the mathematical model for calculation of the electromechanical transients in the stand-alone wind turbine energy system with inverter excited induction generator connected to main and switched dump load. The presented control algorithm structure have made possible for the turbine to track its maximum aerodynamic power curve. The performed simulation results confirmed tracking ability of the system under variable wind speed. Originality. For the first time, we have developed the dynamic model of a stand-alone wind turbine energy system with inverter excited induction generator, main and dump load taking into account machine core saturation in the abc reference frame machine model. We presented the wind turbine vector control block diagram for independent regulation of three variables: wind turbine speed, dc output voltage and machine flux with zero static error for flux and voltage. Practical value. The developed wind turbine power system model may be used for optimization of electromechanical processes in stand-alone wind power based energy sets with induction generators. The presented control algorithm is applicable for DSP control systems of the inverter excited induction generators employed in renewable energy systems.
Authors and Affiliations
Leonid Mazurenko, Oleksander Dzhura
Keywords
Related Articles
- EP ID EP659958
- DOI 10.30929/2072-2052.2018.3.43.24-30
- Views 122
- Downloads 0
DESIGN AND REALIZATION OF COMPUTER BASED OSCILLOSCOPE USING DSP
Purpose. The design and implementation of a financially affordable computer-based oscilloscope using digital signal controller. Such survey will allow students to study principles of designing, development, programming a...
THE INTERVAL CONTROL SYSTEM’S SYNTHESIS OF A LINEAR ELECTROMECHANICAL OBJECT WITH NEGATIVE VISCOUS FRICTION
Purpose. The paper deals with the developing of engineering synthesis’ method for closed loop control system of linear dynamical objects with uncertainty and structure instability. Methodology. We propose to define contr...
SYSTEM OF ELECTROCHEMICAL PROTECTION AGAINST CORROSION WITH ADAPTATION TO CHANGE ELECTROTECHNICAL PARAMETERS OF PROTECTION OBJECT
Purpose. It has been established that the desired operating point of the active corrosion protection system can be achieved by forming the corresponding frequency spectrum of the output signal of the cathodic protection...
ANDROID APPLICATION AIDED SOFTWARE TESTING
Purpose. The article presents possibilities to simplify the process of testing web applications in mobile environments. Originality. The new approach shortens time needed for this testing and this way saves resources nee...
DEVELOPMENT TRENDS AND IMPROVEMENT WAYS OF A WIND TURBINE SIMULATION SYSTEMS
Purpose. To systematize the approaches to synthesis of wind turbine simulators and to develop the recommendations for the improvement of these systems. Methodology. Based on a comprehensive literature review, the general...