Mechanical Preparation, characterization and photocatalytic activity of Fe2O3/ZnO and Fe3O4/ZnO
Journal Title: Carbon - Science and Technology - Year 2014, Vol 6, Issue 1
Abstract
Composite Iron oxide-Zinc oxide (α-Fe2O3/ZnO and Fe3O4/ZnO) was synthesized by two step method. In the first step, uniform α-Fe2O3 and Fe3O4 particles were prepared through a hydrolysis process of ferric chloride at 80 °C. In the second step, the ZnO particles were included in the α-Fe2O3 and Fe3O4 particles by a zinc acetate [Zn(Ac)2·2H2O] assisted hydrothermal method at low temperature (90 °C). X-ray Powder Diffraction (XRD), Scanning Electron microscopy (SEM), Energy-dispersive Xray spectroscopy (EDAX) was used to study its structural properties. The α-Fe2O3 and ZnO phases were identified by XRD, energy dispersive X-ray analysis (EDAX). The photoactivities of α-Fe2O3/ZnO and Fe3O4/ZnO nanoparticles under UV irradiation were quantified by the degradation of formaldehyde. The determination of magnetic property was also carried out by Gouy balance method.
Authors and Affiliations
P. Shah, K. S. Siddhapara, D. V. Shah
Keywords
Related Articles
- EP ID EP49909
- DOI -
- Views 253
- Downloads 0
Implementation of Decentralized Power Generation by Biogas Digester: Policy in Perspective
This paper aims to evolve innovative system for fast track implementation of decentralized power generation by biogas digester across the country commensurate with estimated potential of this energy resource. The methodo...
Thermo-physical properties measurment of water based Fe3O4 nanofluids
Two-step method was used to prepare nanofluids in which nanoparticles were first prepared and then dispersed in basefluid. This paper presents the effect of different volume fractions of magnetic Fe3O4 on thermal conduct...
Monitoring of biogas plants – experiences in laboratory and full scale
To control and regulate the biogas process there are online process parameters and offline process parameters, which basically don’t differ between pilot biogas plants and industrial biogas plants. Generally, temperature...
Vibration analysis of angular contact ball bearing operated with copper oxide nanoparticles mixed ISO VG 68 lubricating oil
The purpose of this paper is to investigate the effect of CuO nanoparticles on lubricating oil and vibration reduction in angular contact ball bearing. CuO nanoparticles are synthesized by using chemical method and chara...
Development of new metal matrix composite electrodes for electrical discharge machining through powder metallurgy process
Electrical discharge machining (EDM) is one of the widely used nontraditional machining methods to produce die cavities by the erosive effect of electrical discharges. This method is popular due to the fact that a relati...