METAL-CONTAINING POLYMERS IN GRAIN CHAIN CONVEYORS
Journal Title: Проблеми тертя та зношування - Year 2017, Vol 75, Issue
Abstract
Laboratory and production tests were conducted to increase the reliability and durability of grain chain conveyors. It is established that the index of abrasive abrasion of metal-containing polymers is determined by the degree of filling and reaches a minimum with a filler content of 15 weight percent. At the same time, the introduction of metallic fillers reduces the abrasion factor of 1.5 – 6 times. It is shown that the replacement of serial parts, made of polyamide-6, with metal-containing polymer increases the reliability and durability of friction units in grain chain conveyors.
Authors and Affiliations
A. I. BURYA, YE. A. YERIOMINA, S. P. YAKOVLEV
Keywords
Related Articles
- EP ID EP324492
- DOI -
- Views 48
- Downloads 0
FEATURES OF TRANSITION MODES OF FRICTION SURFACES WITH PARTIALLY REGULAR MICRORELIEF
The methodology of experiments and the results of the study of transition modes of friction on surfaces with partially regular micro relief was presented. In this article the influence of micro-groove on the surfaces wit...
ENERGY LEVELS OF CONTACTS IN THE FRICTIONAL INTERACTION OF METAL-POLYMER AND SEMICONDUCTOR MATERIALS
The materials of the article show the types of contacts of microprotrusions of metal-polymer and semiconductor materials. The latter are modified in the form of tablets into the working surface of the polymer linings. En...
EVALUATION OF STRUCTURAL AND ENERGY PARAMETERS OF FRICTION PAIRS UNDER START – STOP MODE
The presented study identifies patterns that influence the kinetics of the formation of the boundary layers of lubricating mineral gear oil on activated friction contact surfaces, and the increment of the friction specif...
STRUCTURE, PHASE COMPOSITION, MECHANICAL PROPERTIES OF COMPOSITE MATERIALS BASED TITANIUM ALLOY Ti + 10Mo AND SYNTHESIZE FILMS OF FRICTION
The phase composition, structural state and some of the mechanical properties (HTІ - Hardness, H / Er - normalized hardness, ε - elastic strain and σ - the elastic limit) of composite materials (KM1 Ti + 10Mo + MoS2, KM2...
THE ELECTRO-MECHANICAL ACTION TO THE HETEROGENEOUS SYSTEM STRUCTURAL ELEMENTS
The results of studies under electro-mechanical action for structure elements of disperse objects and living organisms are shown. On the example of the cavitation magnetohydrodynamic resonator model, an opinion was expre...