Methods to assess bearing capacity of corrugated metal structures
Journal Title: Вісник Тернопільського національного технічного університету - Year 2016, Vol 83, Issue 3
Abstract
The aim of the research is to analyze the methods of calculating and evaluation of the bearing capacity of corrugated metal structures (the CMS) in interaction with soil backfill as a result of stress from rolling stock or vehicles. To prove the applicability of these methods for the calculation of pipes of different diameters and different structural forms. The methods of calculating the deflected mode of corrugated metal pipes of small diameter (up to 3 m.) at constant load, and calculation methods CMS of large diameter more than 6 m are analyzed. The calculated models that take into account the spatial work of structures is more correct than " flat " models and calculated scheme, and therefore the calculation of the CMS is to apply three-dimensional calculation model which model the most realistic work of corrugated metal structures. For the first time the methods of calculation and experience designing of flexible corrugated metal structures at interaction of soil backfill and under the influence of the stress from the rolling stock and road transport are analyzed. The obtained analysis of the evaluation methodologies of the bearing capacity of corrugated metal structures of different shape section can be used by engineers in bridge probationary stations Ukrainian Railroad (UR) and Ukravtodor and project organizations involved in the design and construction of the CMS
Authors and Affiliations
Josef Luchko, Vitalii Kovalchuk
Keywords
Related Articles
- EP ID EP261571
- DOI -
- Views 75
- Downloads 0
Influence of soil salinization level on compressive strain resisting
The deterioration of the ecological state of the environment and health of the population living in developing Carpathians deposits of potassium, determines the need to study environmental hazards and risks. The problem...
Production effectiveness of the screw sectional operating members design
Screw operating members have been widely applied in all branches of the national economy thanks to the combination of different operations while transporting. Specific feature of their operation is caused by the variety...
Contact interaction of the parabolic punch with preliminary stressed plate fixed on the rigid basis
Solution of the contact problem on the interaction of the punch with preliminary stressed thick plate is presented in the article. Analytical solutions for the plate were found while it’s modeling by the preliminary stre...
Analysis of methods of worn car pneumatic tires recycling
The level of utilization of pneumatic tires worldwide does not exceed 10% due to imperfection of these methods. Worn car tires are the source of valuable hydrocarbons, the scrap of alloyed steel and textile material as n...
Influence of boron on forming efficient structure of rolled steel and increase its technological plasticity at drawing
The features of the influence of alloying of boron on the structure and formation of complex qualitative indicators of rolled steel out high-carbon steels are showed. The mechanism of action microalloying boron additives...