Model Predictive Control of 4-Leg 3-Level FCC Converter - Influence of Model Parameter Mismatch
Journal Title: Power Electronics and Drives - Year 2018, Vol 2018, Issue 1
Abstract
This paper presents control method of 4-leg 3-level Flying Capacitor Converter (FCC) operating as Shunt Active Pow-er Filter (SAPF), based on Model Predictive Control with Finite number of Control States (FS-MPC). Current control and capacitor voltage balancing are described. Influence of the inductive filter model parameters mismatch on the current control precision is analyzed. Results are supported by experimental waveforms obtained on 10 kVA setup.
Authors and Affiliations
Kamil Antoniewicz, Krzysztof Rafal Rafał, Marek Jasinski
Keywords
Related Articles
- EP ID EP408033
- DOI 10.2478/pead-2018-0014
- Views 80
- Downloads 0
Dynamic Performance of Estimator-Based Speed Sensorless Control of Induction Machines using Extended and Unscented Kalman Filters
This paper presents an estimator-based speed sensorless field oriented control (FOC) method for induction machines, where the state estimator is based on a self-contained, non-linear model. This model characterizes both...
A MULTILEVEL SWITCHED CAPACITOR DC-DC CONVERTER. AN ANALYSIS OF RESONANT OPERATION CONDITIONS.
Background: This paper presents the research results of a multilevel switched capacitor DC-DC converter (MLSCC). The converter, for power electronic applications, can operate in ZCS mode by utilizing resonant circuits fo...
VERTICAL TRANSPORTATION: HARMONICS EFFECTS OF DRIVES BY PM MACHINES
Motor drive is a widely used technology, offering many advantages, such as exceptional speed, torque control as well as greater flexibility. Improvement of reliability and efficiency has become a great research interest....
Space vector pulse width modulation for high speed induction motor implemented in Nios II softcore processor
The purpose of the paper is to present the idea of space vector pulse width modulation and implementation in Nios II softcore processor. SVPWM module was described in both a classical method in HDL as independent structu...
POSSIBILITIES FOR DETERMINING THE INTERFERENCE BETWEEN A POWER SUPPLY NETWORK AND A CONVERTER FED DRIVE
Background: This article presents the methodology that enables the analysis of the impact of the converter drive on the power supply network and the impact of the network on the drive to be performed. Material and method...