Modelling Photovoltaic System Using Bond Graph Method: A Comparative Study
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2017, Vol 12, Issue 6
Abstract
Bond Graphs (BG)are perceived as a promising possibility for modeling complex physical systems. This paper explores its potential by undertaking the analysis, modeling and design of a photovoltaic (PV) solar system. A model of a photovoltaic solar system is performed using Bond Graph Approach based on a 1-diode/2- resistors (1D & 2R) circuit model. The main aim of this model is to study and master the behavior of this PV system. Moreover, it seeks building up a better and more reliable PV model to replicate the exact I-V characteristics. To validate the accuracy of the proposed model, a comparison with MATLAB PV model was carried out. Simulation results of this model were obtained using 20-Sim software. The outcome reveals that the model replicates MATLAB PV model curve to a very good degree of accuracy under the considered operating conditions.
Authors and Affiliations
Zakaria Khaouch, Mustapha Adar, Youssef Najih, Nourreeddine Kouider
Keywords
Related Articles
- EP ID EP388471
- DOI 10.9790/1676-1206024551.
- Views 142
- Downloads 0
Power Quality Impact Analysis of Wind Farms on Utility Grid, A Case Study in Ethiopia
The power quality of the grid system with wind power plants is mostly affected because of its intermittent nature. Hence, in order to assure the power quality of Adama-I wind farm and its impact on the grid, continuous a...
Smart Switch
Smart switch is a device which operates (ON/OFF) any electrical appliance with the help of mobile phone only by sending a SMS from any place (wherever GSM network is available). User sends a SMS to the mobile number, ins...
Design of power system stabilizer for damping power system oscillations
The problem of the poorly damped low-frequency (electro-mechanical) oscillations of power systems has been a matter of concern to power engineers for a long time, because they limit power transfers in transmission lines...
Hybrid Two Stage Quasi Z Source Boost Converter for Photovoltaic Applications
This paper presents a Hybrid Two Quasi Z-source(HTQZS) DC-DC converter for photovoltaic applications. These are mainly employed to full fill the demand of the voltage boost in photovoltaic applications from the lower val...
Implementation Of Classification Methods For Diagnosis Of Lung Cancer nodules In CT Images
The main aim of this work is to propose a novel Computer-aided detection (CAD) system based on a Contextual clustering combined with region growing for assisting radiologists in early identification of lung cancer from c...