Multicriterial Optimization Applied for Choosing the Measuring Instrument
Journal Title: RECENT - Year 2012, Vol 13, Issue 36
Abstract
According to David C. Crosby, "If you don’t know the capability of your measurement system, you don’t know if your measurements, or your products, are good or bad". Starting from this basic it had been made an comparative analyze from the point of view of the capability of measuring of an interior diameter micrometer, indicating micrometer (caliper) and a 3D measuring machine in order to identify the optimal management measure for serial machining pieces to measure interior diameters. The test was made in a controlled environment, with different operators in order to see how each measuring system is affected by the variables: method of work and operator. The performance characteristics used to determine which measurement device is the best choice to be used in serial production were: cost of the system, quality, measurement system analyze or repeatability and reproducibility (R&R), efficiency and method of measurement for each device. From the case study made, the result was that the best cost effective, with the best efficiency, in quality and with the best MSA (Measurement system analysis) value is the caliper.
Authors and Affiliations
Iulian ORZAN, Constantin BUZATU
Keywords
Related Articles
- EP ID EP92988
- DOI -
- Views 122
- Downloads 0
Contribution to the Performances Improvement of a Machine Boring Mill Operation
The performances requested from the production equipment and the associated economic issues bring the originators and the users of production means to be interested in the failures of the materials, with their consequenc...
Selection of the Proper Layout of Manufacturing Lines
A model is proposed which helps select the type of layout - circular or linear, for deploying technology machines. Based on the coefficient of volumetric efficiency, the proposed model is solved using the software packag...
Physicochemical Basis for Intensification of the Process of Salting Fish
The article deals with the physicochemical characteristics of the process of salting fish. A very long duration of salting large fish is the main deterrent to the mechanization and automation of salted fish, which exclud...
Technical–Economic Evaluation Subsystems Energy Production Systems within the Light Parameter "Energy Intensive"
The selection of the system’s efficiency parameter as an essential technical one, having a major influence over the production system is justified because it directly influences the costs of the PS products, the PS expen...
Study of the Mechanism of Diffusion in Siliconized Brass
The siliconizing thermochemical treatment has been done in a powdery medium with paste, in sealed boxes. After the micro-structural investigations with scanning electronic microscope (SEM) and EDAX analysis, it has estab...