Naciski na ścianki formy zamkniętej podczas zagęszczania mieszanki wapienno-piaskowej
Journal Title: Tribologia - Year 2011, Vol 240, Issue 6
Abstract
W artykule przedstawiono analizę wpływu zagęszczanych materiałów sypkich, na przykładzie mieszanki wapienno-piaskowej (stosowanej do produkcji wyrobów silikatowych), na ścianki boczne w formie zamkniętej. Na podstawie badań doświadczalnych wyznaczono współczynnik nacisków bocznych ξ. Jego znajomość pozwala na wyliczenie nacisku bocznego ośrodka sypkiego na zakładanej wysokości, w zależności od zastosowanego ciśnienia zagęszczającego.
Authors and Affiliations
Bazyli Krupicz, Wojciech Tarasiuk
Keywords
Related Articles
- EP ID EP270553
- DOI -
- Views 53
- Downloads 0
INFLUENCE OF A TRACK CONFIGURATION ON THE RESISTANCES OF MOVEMENT OF A SCRAPER PIPE CONVEYOR
Nowadays, scraper pipe conveyors are implemented in a wider range in many industrial branches because of technological and ecological reasons and industrial safety. Besides many advantages, like simple construction and s...
THE EVALUATION OF SULPHURIC ACID WATER SOLUTION INFLUENCE ON THE STATE OF EPOXY COATING SURFACE
The paper presents the examination results concerning the influence of (3, 10, 20)% sulphuric acid water solutions on the erosive wear of epoxy coatings. Chemical structure change of aged coatings was stated as the resul...
EVALUATION OF TRIBOLOGICAL COATINGS OBTAINED BY METAL SPRAYING
This paper presents the results of tribological properties such as wear and the coefficient of friction forces obtained by coating by metal spraying. The research was based on coatings of nickel, chromium, chromium-nicke...
THE ANALYSIS OF THE POSSIBILITY OF THE UTILIZATION OF THE EXPLOATIONAL PREPARATION MOTOR LIFE PROFESSIONAL IN MODIFYING THE CONDITIONS OF THE WORK OF THE KNOTS OF THE FRICTION OF VEHICLES
This paper presents the results of studying the lubricating properties of motor oil, Superol CC SAE-30, and modifying the exploational preparation (PE) about the chemical working MOTOR LIFE PROFESSIONAL (MLP). Investigat...
PRELIMINARY EXPERIMENTAL RESEARCH OF TRIBOLOGICAL PROPERTIES OF BUS BRAKES FRICTION LININGS
Experience gained from the use of buses in urban conditions showed that the working conditions of friction elements of the braking system, ensuring traffic safety, are associated with high loads. This leads to the intens...