INFLUENCE OF A TRACK CONFIGURATION ON THE RESISTANCES OF MOVEMENT OF A SCRAPER PIPE CONVEYOR
Journal Title: Tribologia - Year 2010, Vol 231, Issue 3
Abstract
Nowadays, scraper pipe conveyors are implemented in a wider range in many industrial branches because of technological and ecological reasons and industrial safety. Besides many advantages, like simple construction and services, easy housing and small dimensions in a lateral cross-section, the possibility of materials transport at higher temperatures, these conveyors characterised by great movement resistance cause abrasive wear of their elements. On the resistance, an essential influence is also the conveyor track configuration analysed in the paper. It has been shown that, due to the special configuration of scraper pipe conveyor track (its length, inclination against the level), the conveyor movement resistance could be limited; and thanks to this, one could also lower the abrasive wear of conveyor elements. The obtained dependencies presented in the paper could be useful to the rational design and exploitation of scraper pipe conveyors.<br/><br/>
Authors and Affiliations
Kzaimierz Furmanik
Keywords
Related Articles
- EP ID EP517305
- DOI -
- Views 67
- Downloads 0
WŁAŚCIWOŚCI STRUKTURALNE I ODPORNOŚĆ NA ZUŻYWANIE ŚCIERNE STALI BRINAR 400 I BRINAR 500
W pracy przedstawiono budowę strukturalną oraz wyniki badań odporności na zużywanie ścierne stali Brinar 400 i Brinar 500. Na podstawie przeprowadzonych metodami mikroskopii świetlnej i skaningowej badań wykazano, że sta...
TRIBOLOGICAL PROPERTIES OF BEARING STEEL AFTER HYBRID TREATMENT, COMBINED DIFFUSION CHROMIZING WITH THE PVD METHOD
The objective of the research in this work was the modification of the structure of chromized carbide layers on a bearing steel surface by the combination of diffusion chromizing with subsequent treatment, chromium nitri...
TRIBOELECTRIC PHENOMENA DURING FRICTION WITH DIAMOND-LIKE CARBON COATINGS
The paper presents the results of tribological studies concerning elements with DLC coatings. Steel, whose properties are relatively well known, was used as the reference material. The aim of the analysis was to determin...
Wybrane własności tribologiczne stopu z grupy FeAl
W ramach przedstawionych badań analizie poddano własności tribologiczne stopów z grupy FeAl. Jako materiał wyjściowy do badań zastosowano stop FeAl w formie odlewu oraz otrzymany z proszku stopu. Dyskusji poddany został...
Research on the tribological parameters for materials couples used for valves, valve guides and seat inserts
Research on the tribological properties of TiAl alloys used for valves mating with valve guides and seat inserts, made of cast iron, has been done. The aim of the research has been to obtain values of the coefficient of...