Journal Title: Materials Engineering - Materialove inzinierstvo (MEMI) - Year 2011, Vol 18, Issue 1
Abstract
Authors and Affiliations
Johannes Steinhaus, Bernhard Moeginger, Mandy Großgarten , Berenika Hausnerova
Keywords
Related Articles
- EP ID EP85717
- DOI -
- Views 137
- Downloads 0
INFLUENCE OF COOLING RATE DURING QUENCHING ON IMPACT TOUGHNESS OF A HOT-WORK TOOL STEEL AT AMBIENT TEMPERATURE AND AT 200 °C
Gross cracking of die-casting dies with inferior toughness sometimes occurs through too low preheating temperature and/or too slow cooling during quenching. This study aimed to clarify the influence of cooling rate on th...
The impact of welding wire on the mechanical properties of welded joints
This paper presents results of the mechanical properties of Hardox 450 steel welded joints. These welded joints were made in accordance with welding procedure specifications (WPS), which was prepared and applied in the...
KINETICS OF HARDNESS CHANGES DURING AGE-HARDENING OF SILUMIN
Simple phenomenological description of age-hardening kinetics of supersaturated solid solution is presented using the sum of exponential functions with negative arguments containing rate constants, for whose temperature...
High temperature degradation of powder-processed Ni-based superalloy
The aim of present work is to study the high temperature degradation of the powder-processed polycrystalline superalloy Ni-15Cr-18Co-4Al-3.5Ti-5Mo. This superalloy has been applied as material for grips of a creep machin...
THE EFFECT OF REFLOW ON WETTABILITY OF Sn 96.5 Ag 3 Cu 0.5 SOLDER
Surface conditions on Printed Circuit Board (PCB) final finishes have an important impact on the wetting behavior with lead-free solder. The improvement of the wettability in liquid Sn 96.5 Ag 3 Cu 0.5 Solder alloy on PC...