Dalla frattura alla scienza dei metalli
Journal Title: Frattura ed Integrità Strutturale - Year 2008, Vol 2, Issue 4
Abstract
La frattura inizia ad essere considerata oggetto di studio da Leonardo da Vinci e trova in Vannoccio Biringucci ed in Galileo Galilei i precursori di un approccio scientifico al come e perchè si produce una rottura. Nell'arco di poco più di un secolo, il sedicesimo, si trovano i primi riferimenti scritti di esperienze e interpretazioni su cui lavorare: i limiti tecnologici e di conoscienza scientifica dei materiali allora disponibili hanno impedito una interpretazione soddisfacente del fenomeno della rottura. Sarebbero occorsi altri due secoli per collegare una relazione lineare, prima forza e deformazione, e poi tensione e deformazione
Authors and Affiliations
M. Cavallini
Keywords
Related Articles
- EP ID EP140006
- DOI 10.3221/IGF-ESIS.04.03
- Views 72
- Downloads 0
Multi-purpose fatigue sensor. Part 1. Uniaxial and multiaxial fatigue
The paper describes the key principles and results of preliminary experiments aimed at the development of new technique for the fatigue life prediction under conditions of biaxial cyclic tension. The foundations o...
Damage propagation in a masonry arch subjected toslow cyclic and dynamic loadings
In the present work, the damage propagation of a masonry arch induced by slow cyclic anddynamic loadings is studied. A two-dimensional model of the arch is proposed. A nonlocal damage-plasticconstitutive law is ado...
Fatigue crack growth in additive manufactured products
Additive Manufacturing (AM) is a new innovative technique that allows the direct fabrication of complex, individual, delicate and high-strength products, based on their 3D data. Selective Laser Melting (SLM) ...
Experimental investigation of fibre reinforced plastics with hybridlayups under high-velocity impact loads
This paper deals with experimental investigations concerning energy dissipation capacity ofdifferent kinds of reinforcement fibres in monolithic and hybrid layups under high-velocity impact loads. Theinvestigated k...
Fatigue properties and fracture mechanism of load carrying type fillet joints with one-sided welding
The structures of the hydraulic excavator and the crane have numerous one-sided welded joints. However, attachments with box like structures are difficult to weld at both sides. Therefore, high accurate evalu...