On monitoring of mechanical characteristics of hot rolled S355J2 steel
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 37
Abstract
Hot rolling normalization technology for producing sheets from a low-carbon steel, Steel S355J2, used in the Bulgarian Metallurgical Plant “STOMANA Industry SA” is under investigation. A newly introduced automatic application optimization procedure in this technology is an important step that leads to avoiding of traditional heat treatment, improving of steel mechanical characteristics, increasing of production efficiency, all resulting in high quality final products. On the basis of the final mechanical rolled-sheet characteristics - yield strengths, Re, ultimate tensile strengths, Rm, absorbed energies in impact tests, K, and elongations after fracture - some energy-stress and energy-stress-elongation constructions-spaces have been plotted. These spaces can be used for general evaluation of the applied rolling technology and for prediction of steel-sheet mechanical behaviour.
Authors and Affiliations
D. Angelova, R. Yordanova, A. Georgiev, S. Yankova
Keywords
Related Articles
- EP ID EP118002
- DOI 10.3221/IGF-ESIS.37.35
- Views 64
- Downloads 0
Development of a Very High Cycle Fatigue (VHCF) multiaxial testing device
The very high cycle region of the S-N fatigue curve has been the subject of intensive research on the last years, with special focus on axial, bending, torsional and fretting fatigue tests. Very high cycle fatigue...
Crack path dependence on inhomogeneities of material microstructure
Crack trajectories under different loading conditions and material microstructural features play an important role when the conditions of crack initiation and crack growth under fatigue loading have to be evaluated...
Research on parameters optimization of bilateral ring gear blank-holder in thick-plate fine blanking
To compensate for the poor quality of thick-plate blanking parts in cross-section, this paper suggests using the optimizing bilateral ring gear holder parameters to increase burnish zone and improve cutting preci...
Crack initiation and propagation on the polymeric material ABS (Acrylonitrile Butadiene Styrene), under ultrasonic fatigue testing
Crack initiation and propagation have been investigated on the polymeric material ABS (Acrylonitrile Butadiene Styrene), under ultrasonic fatigue testing. Three controlled actions were implemented in order to...
Fatigue crack growth prediction in 2xxx AA with friction stir weld HAZ properties
An analytical model is developed to predict fatigue crack propagation rate under mode I loading in 2024 aluminum alloy with FSW HAZ material characteristics. Simulation of the HAZ local properties in parent 2...