STONE WASTE AS A GROUNDBREAKING CONCEPTION FOR THE LOW COST CONCRETE
Journal Title: INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY - Year 2013, Vol 4, Issue 4
Abstract
Stone wastes are generated as a waste during the process of cutting and polishing. Stone industry produces large amounts of Stone waste which causes environmental problems. To produce low cost concrete by replacing cement with Stone Waste & to reduce disposal and pollution problems. The innovative use of Stone Waste in concrete by replacing OPC and PPC cement with this material was the other alternative of the traditional concrete. The aim of this research is to replace the OPC and PPC cement by Stone Waste accordingly in the range of 0%, 10%, 20%, 30% 40%, & 50% by weight for M-25 Grade concrete. Concrete mixtures were produced, tested and compared in terms of workability and strength to the conventional concrete. The Compression Strength Test is carried out to evaluate the mechanical properties for 7, 14 and 28 days. As a result, the compressive Strength increased up to 30% replacing of Stone Waste in OPC and 20% replacing of stone waste in PPC. This research work is concerned with the experimental investigation on strength of concrete and optimum percentage of the partial replacement by replacing OPC and PPC cement via 0%, 10%, 20%, 30%, 40% and 50% of stone waste. Keeping all this view, the aim of the investigation is the behavior of concrete while replacing Cement with different proportions of Stone Waste in concrete by performing the tests like compression strength and also try to find the economic cost by replacing the Stone Waste with OPC and PPC cement.
Authors and Affiliations
Ankit Nileshchandra Patel 1 , Prof. Jayeshkumar Pitroda
Keywords
Related Articles
- EP ID EP141020
- DOI -
- Views 110
- Downloads 0
A Nonlinear Controller for Photovoltaic Water Pumping System
The aim of this work is to suppy an energy for photovoltaic cell and that energy will go to the inverter and then went to induction motor to be operating certain speed then water pumb process achieved. Main target...
Application of Waste Foundry Sand for Evolution of Low-Cost Concrete
Generation of waste foundry sand as by product of metal casting industries causes environmental problems because of its improper disposal. Thus, its usage in building material, construction and in other fields...
An Area Efficient (31, 16) BCH Decoder for Three Errors
Bose, Ray- Chaudhuri, Hocquenghem (BCH) codes are one of the efficient error-correcting codes used to correct errors occurred during the transmission of the data in the unreliable communication mediums. This paper presen...
Inductive Charging Technique
The fuels like petrol, diesel etc. cost is increasing day by day because of increased number of vehicles and proportional fuel usage. Also the sources of these fuels are depleting in nature. As a solution to this p...
BER Performance of MC-CDMA Using Walsh Code with MSK Modulation on AWGN and Rayleigh Channel
Multi-carrier code division multiple access (MCCDMA) is method for high speed data rate communication. It skip the problem of inter symbol interference.MC-CDMA too provide spatial diversity, which mitigate the fa...