NUMERICAL ANALYSIS OF DAMAGE DURING HOT FORMING
Journal Title: Computer Methods in Materials Science - Year 2018, Vol 18, Issue 3
Abstract
The main aim of the presented research is the analysis of damage evolution in 16MnCrS5 steel during hot forming based on results obtained from finite element modelling. Particular attention is put on the interaction between dynamic recrystallization (DRX) and damage initiation at the matrix-inclusion interface. Moreover, a modified Gurson-Tvergaard- Needleman (GTN) model is proposed with the nucleation criterion taken from an extended Horstemeyer model, which predicts damage nucleation based on material softening due to the DRX and stress state in the material.
Authors and Affiliations
Joanna Szyndler, MUHAMMAD IMRAN, MUHAMMAD JUNAID AFZAL, MARKUS BAMBACH
Keywords
Related Articles
- EP ID EP539147
- DOI -
- Views 105
- Downloads 0
RULE-BASED CONTROLLING OF A MULTISCALE MODEL OF PRECIPITATION KINETICS
One of the most important obstacles of widening of multiscale modelling is its high computational demand. It is caused by the fact, that each of numerous fine scale models has comparable computational requirements to a c...
SIMULATION OF MICROSTRUCTURE EVOLUTION DURING FORGING AND HEAT TREATMENT OF Ti-6Al-3.5Mo-1.5Zr-0.3Si TITANIUM ALLOY
The model of dynamic recrystallization of Ti-6Al-3.5Mo-1.5Zr-0.3Si has been developed based on experimental data and implemented in FEM code QForm. Kinetics of dynamic recrystallization was simulated by Johnson-Mehl-Avra...
NUMERICAL ANALYSIS OF DAMAGE DURING HOT FORMING
The main aim of the presented research is the analysis of damage evolution in 16MnCrS5 steel during hot forming based on results obtained from finite element modelling. Particular attention is put on the interaction betw...
A SIMULATION STUDY ON THE CLOSED-LOOP CONTROL OF SCREW PRESS FORGINGS USING THE IMPACT ENERGY AS CONTROL INPUT
Screw presses are energy-restricted forming machines that use rotational energy stored in a flywheel for forming, which is converted into a linear movement by a threaded screw. Screw presses are widely used for forging s...
THE HIGHEST ENTROPY PRODUCTION DURING DIFFUSION
In the present paper, the theory of the highest entropy production is discussed. It allows to predict, which phases will grow during the multiphase ternary interdiffusion process. Moreover, the theory says, that phase wi...