RULE-BASED CONTROLLING OF A MULTISCALE MODEL OF PRECIPITATION KINETICS
Journal Title: Computer Methods in Materials Science - Year 2018, Vol 18, Issue 2
Abstract
One of the most important obstacles of widening of multiscale modelling is its high computational demand. It is caused by the fact, that each of numerous fine scale models has comparable computational requirements to a coarse scale one. There are several ways of decreasing of computational time of multiscale models. Adaptation of a structure of a model is one of the most promising. In this paper the Adaptive Multiscale Modelling Methodology is described, including Knowledge-Based adaptation of the multiscale model of precipitation kinetics during heat treatment. Core features of the methodology are introduced. The numerical model of heat treatment of an aluminium alloy based on the methodology and the dedicated framework is presented. Besides modelling of macroscopic heat transfer, models of precipitation kinetics based on thermodynamic calculations are included. To decrease computational requirements arising from coupling of the macroscale model and the thermodynamic models, metamodeling and similarity approaches are applied. Computations with several configuration of rules are described, as well as their results. Reliability and time consumption of computations are discussed. Future perspectives of combining of modelling and metamodeling in one, integrated model are discussed.
Authors and Affiliations
PIOTR MACIOŁ
Keywords
Related Articles
- EP ID EP539069
- DOI -
- Views 122
- Downloads 0
SEDIMENTATION IN BINARY Cu-Sn SYSTEM
In the present paper the sedimentation process in binary multiphase Cu-Sn system is presented. The initial samples were produced by GoodFellow, the initial molar fraction was Cu30Sn70 respectively. Thus, the two-phase re...
APPLICATION OF THE IMMUNE ALGORITHM IRM FOR SOLVING THE INVERSE PROBLEM OF METAL ALLOY SOLIDIFICATION INCLUDING THE SHRINKAGE PHENOMENON
In the paper the mathematical model of the inverse one-dimensional problem of binary alloy solidification, with the material shrinkage phenomenon taken into account, is defined. The process is described by using the mode...
A VISION SYSTEM TO SUPPORT DETERMINATION OF MECHANICAL PROPERTIES OF TUBES REQUIRED FOR COMPUTER MODELLING OF TUBE HYDROFORMING
Reliability of computer modelling of tube hydroforming depends strongly on mechanical properties of tubes, which are difficult to determine and sensitive to tube production methods. Some developments in experimental set-...
SIMULATION OF MICROSTRUCTURE EVOLUTION DURING FORGING AND HEAT TREATMENT OF Ti-6Al-3.5Mo-1.5Zr-0.3Si TITANIUM ALLOY
The model of dynamic recrystallization of Ti-6Al-3.5Mo-1.5Zr-0.3Si has been developed based on experimental data and implemented in FEM code QForm. Kinetics of dynamic recrystallization was simulated by Johnson-Mehl-Avra...
USING THE HYPERGRAPH GRAMMAR FOR GENERATION OF QUASI OPTIMAL ELEMENT PARTITION TREES IN TWO DIMENSIONS
The paper presents the graph grammar model of Finite Element Method allowing for speeding up performed numerical simulations. In the presented approach, the finite element mesh operations are performed together with oper...