Numerical-Experimental Analysis of Applicability of NANOS-BA Steel for Armour
Journal Title: Problemy Mechatroniki. Uzbrojenie, lotnictwo, inżynieria bezpieczeństwa - Year 2013, Vol 4, Issue 4
Abstract
Described in this paper is the analysis of the applicability of NANOS-BA steel for armour. The results of depth of penetration (DP) tests of the NANOS-BA steel plates placed on the Armox 600T „witness” plate and fired at with the 12.7 mm B-32 type projectile are shown. These results are compared to the Al2O3 ceramic plate penetration with the use of the same method. In both cases the armour was of similar area density (approx. 39 kg/m2). The theoretical analysis of the applicability of the NANOS-BA steel in a layered armour was conducted and numerical simulations of the DP tests were performed. Additional simulations were made for two variants of layered armour penetration: in variant 1 – One of the layers in construction was of the NANOS-BA steel, in variant 2 – One of the layers was of special ceramics. The process of the simulations verification is described, in which the deformations of the „witness” plate obtained experimentally are compared to the results of the simulations. Small differences (< 2 mm) of penetration were obtained in the simulations and experimentally confirmed that the simulations were performed correctly.
Authors and Affiliations
Adam WIŚNIEWSKI, Paweł ŻOCHOWSKI
Experimental Testing of Aramid Composite Applied in Ballistic Armour using Ultrasonic IR Thermography
Reference samples, in which artificial discontinuities (defects) are fabricated, are used to verify non-destructive testing procedures. Artificial discontinuities are known defects of reference samples and enable verific...
Sliding Mode Control for a Gyroscope System
This paper presents a mathematical model of a gyroscope system with a sliding mode controller. A comparative analysis based on various control algorithms implemented in a controlled gyroscope system installed on a mobile...
Standard Rifle of the MSBS-5.56K Small Arm System as the Main Polish Future Soldier Weapon (Part I)
The prototype of 5.56 mm Assault Rifle in classic layout, which creates the backbone of 5.56 Modular Weapon System (MSBS-5.56) designed in both classic (MSBS-5.56K) and bull-pup (MSBS-5.56B) layout is precisely described...
Koncepcja i algorytm manewru ochrony obiektu latającego przed kolizją z napowietrzną linią przesyłową wysokiego napięcia
W opracowaniu przedstawiono koncepcję, przybliżony model matematyczny i wstępne obliczenia dotyczące manewru chroniącego nisko latający aparat bezpilotowy lub samosterujący pocisk rakietowy przed kolizją z linią przesyło...
Koncepcja zapalnika z samolikwidatorem do przeciwpancernego pocisku rakietowego granatnika RPG-76 „Komar”
W pracy przedstawiono koncepcję zapalnika z samolikwidatorem do przeciwpancernego pocisku rakietowego PG-76 granatnika RPG-76 „KOMAR”. Głównym założeniem było, aby zapalnik spełniał wymagania Norm Obronnych NO-13-A233 „S...