Numerical Study on Ballistic Phenomena - Part Two
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2016, Vol 39, Issue 1
Abstract
The study of ballistic phenomena (interior ballistics, exterior ballistics and terminal ballistics) is an activity that involves the use of complex and at the same time very expensive equipment. Also, another aspect worth taking into account is the existence of risks when it comes to investigating the phenomena in this area. The use of numerical methods for making the pre-digital tests can be seen as a logical and inexpensive approach. Furthermore, besides these advantages, the simulations of various ballistic phenomena allow for an otherwise impossible observation of different sizes and details regarding the polygon tests. In the case studied in this paper, the numerical modelling of the phenomenon of the charge of water propulsion allows for, as an example, the average speed evaluation of the whole amount of water, while in the case of polygon tests only the speed of peak flow value may be shown. This paper is a numerical study on disrupting agent propulsion (internal ballistics), the speed water flow development and its distribution within the flow (the balancing kickback agent) being observed.
Authors and Affiliations
Vasile BĂLAN, Marian BORDEI
Keywords
Related Articles
- EP ID EP577286
- DOI -
- Views 107
- Downloads 0
Surface Hardening of 40Cr10 Steel after Short Time Nitriding in Fluidized Bed
The paper is based by nitriding in fluidized bed experiments over laboratory plant. Fluidization applications are characterized by high values of mass and heat transfer coefficients. For experiments were used 40Cr10 (Rom...
Improving Slab Quality Through Control of Cooling Parameters in Continuous Casting Plants
Coupling the continuous casting installations with the rolling ones is a modern process that brings considerable economic benefits. During the continuous casting process of steel slabs, necessary technological conditions...
Characterization of Iron and Low Alloy Steel Powders Obtained by Water Atomization
Three types of iron and low ally steel powders were investigated to determinate their physical properties and surface morphology by SEM analysis. The powders were obtained by water atomization. The first type of powder i...
Risk Assessment and Workplace Conformity Audit, Blast-furnace Worker, C.S. Arcelor Mittal Galati
Risk assessment is the first step towards safer and healthier jobs, and it is the way to reduce accidents at work and occupational diseases. Taking into consideration the need for good management of the risks of accident...
Study on the Rheology of Corn Oil Subjected to Forced Oxidation
This paper reflects a study on the rheology of corn oil in unoxidized state, subjected to forced oxidation treatment. Using the Rheotest2 system, the variation of dynamic viscosity with temperature and shear rate, using...