ON THE ISSUE OF THE USE OF ROLLER-COMPACTED CEMENT-CONCRETE MIXTURES FOR CONSTRUCTION OF ROAD PAVEMENTS
Journal Title: Автомобильный транспорт - Year 2018, Vol 42, Issue
Abstract
Problem. At present, on the existing roads of Ukraine the construction of road pavement does not meet the requirements for durability and load-carrying capacity, because of constant in-crease in traffic intensity, the emergence of new types of vehicles with increased axle loads and uncontrolled transport overload. The widespread use of roller-compacted cement mixes (RCC mixes) in the construction of road pavements for highways will solve these problems. Goal. The aim of the work is to study the effect of the components of a rigid cement-concrete mixture on the physical and mechanical properties of concrete, as well as the industrial introduction of the technology of RCC in Kharkiv. Methods. The methods for assessing RCC characteristics allow to carry out all necessary research on the basis of existing regulations in Ukraine. Results. As a result of the studies carried out, compositions of RCC mixtures on local materials with compres-sive strengths of 60 MPa were obtained, with a bending strength of more than 4.5 MPa, density of 2420 kg/m3 and frost resistance of F200. Novelty. The scientific novelty of the construction works is in the selection of the compositions of RCC mixes by applying high-quality cement, fine sand, two (or three) fractions of rubble, mineral additives, complex additives and nonmetallic fibers, which leads to an increase in the density and strength of the RCC, and also increases the durability of the cement concrete coatings compacted. Practical value. Laboratory research and selection of cement-concrete mixes for production of RCC used in the construction of road pavements were carried out to prove the aims of the work, as well as industrial introduction of the technology of RCC mortar has been carried out by laying the road section on the territory of the enterprise in Kharkiv city.
Authors and Affiliations
S. A. Bugaevsky, S. N. Korzun, A. V. Vinnikov, V. S. Semyonenko, M. S. Bugaevsky
Keywords
Related Articles
- EP ID EP413570
- DOI -
- Views 84
- Downloads 0
USE OF INFORMATION TECHNOLOGIES IN METHODOLOGY OF TEACHING THE DISCIPLINE «COMPUTER ELECTRONICS»
Methodology of teaching of «Computer Electronics» course offers division «Theory of electric and magnetic chains» in the conditions of the distance form of teaching.
АНАЛІЗ МОЖЛИВОСТЕЙ ФОРМАЛЬНОГО ПОДАННЯ ЕЛЕМЕНТІВ ВІРТУАЛЬНОГО ОСВІТНЬОГО ПРОСТОРУ
Розглянуто можливості формального подання елементів віртуального освітнього простору. Показано узагальнену схему віртуального освітнього простору. Для систематиза-ції об’єктів віртуального освітнього простору запропонова...
BEHAVIOUR OF ELECTRONIC BLOCKS AND DEVICES UNDER ACTION OF IMPACT LOADS AT ROAD ACCIDENTS
The process of impact loads action on vehicle’s design elements that contain electronic devices intended for maintenance of its passive safety is considered. The action time is compared to the speed of shock wave propaga...
МОДЕЛЬ УРАХУВАННЯ ЙМОВІРНОСТІ ЗВОРОТНОГО ЗАВАНТАЖЕННЯ ПРИ ВИБОРІ НАПРЯМКУ ПЕРЕВЕЗЕННЯ ВАНТАЖУ
Сформовано модель розрахунку ймовірності зворотного завантаження автомобіля при виконанні міжміських вантажних перевезень для найпростішого випадку. Представлено результати розрахунку ймовірності зворотного завантаження...
MODELING OF THE HARP STYLE CABLE-STAYED BRIDGE AND ITS STRENGTH ANALYSIS
Сable-stayed bridge structural optimization based on linear programming and static analysis is described. Two structural schemes are proposed. Series of geometric, computational models with various boundary conditions ar...