Operating properties of air inlet filters in a sports car engine
Journal Title: Bulletin of the Military University of Technology - Year 2017, Vol 66, Issue 2
Abstract
There are presented design solutions and operation properties of air inlet filters of motor vehicles and sports cars. An analysis of the impact of the use of a sports car air filter in a passenger car was performed. The effect of this change on the increase in power and torque in several car engines was shown. The conditions and methodology of sports car air filter studies have been developed. A research stand with a particle counter was presented. The test results on the characteristics of efficiency and accuracy filtration and flow resistance of two sports air filters were presented. Each filter was tested at a different filtration rate. The dust absorption coefficient of the sport filter was determined. The dust particle fraction in the air purified behind the filter was calculated. Keywords: engine, air filter, sports filter, filtration efficiency and filtration accuracy, flow resistance, dust absorption coefficient, particle size
Authors and Affiliations
Tadeusz Dziubak, Yuriy Yendzheyovskyy
Keywords
Related Articles
- EP ID EP194032
- DOI 10.5604/01.3001.0010.1894
- Views 69
- Downloads 0
Stany zarysowania i ugięcia tarcz żelbetowych z otworami z fibrobetonu wysokowartościowego
W artykule przedstawiono analizy stanów zarysowania i ugięcia tarcz żelbetowych z otworami z betonu wysokowartościowego z włóknami stalowymi i polipropylenowymi. Badania prze-prowadzono dla trzech elementów zróżnicowanyc...
Measurement of shape mapping accuracy of a flaccid membrane of a heart assist pump
The paper presents the research results which are a continuation of work on the use of image processing techniques to determine the membrane shape of the artificial ventricle. The studies were focused on developing a tec...
Paths of the truss girder exertion
The analysis of the response of the statically undetermined truss girder in the process of the proportional loading is presented in this paper. Rigidity of the six-bar girder is selected by the draw of the profile bars a...
Aspects of alteration of masonry historical buildings without ring beam of floor slabs
Some problems of alteration for building structures of a conventional masonry for which working lifetime is approaching or has exceeded the expected design life are presented. In the course of these works, non-bearing ma...
Technical diagnostics of objects using active imaging
The article presents an original method of the space-time framing as a potential tool for technical diagnostics. Because of the unusual observation and measurement properties such as the selection of the observed spatial...