Optimal Control of Micro-grid (MG) to Improve Voltage Profile Including Combined Heat and Power System
Journal Title: روش های هوشمند در صنعت برق - Year 2018, Vol 9, Issue 36
Abstract
Usually, in the studies of optimal control for the micro-grid with combined heat and power (CHP), economic and environmental goals have been raised. In these studies, the optimization of control devices and compensators that are aimed at improving the technical aspects of micro-grid has not been considered. Therefore, in this paper, these goals are considered simultaneously. In this paper the shunt capacitor, shunt reactor, static var compensator, load ratio control transformer, step voltage regulator and power generation of DGs are investigated as control variables with the aim of considering costs, losses and voltage profile improvement. The case under study is a distribution test system including 22 buses, which consists of photovoltaic and fuel cell. All network data is extracted from a real system. As a result, the system can completely represent a real system. In order to complete the study of the system, the emissions of fuel cells are considered in the objective function. The efficiency and output electrical and thermal power of the fuel cell are considered related to part load ratio as a real standard model introduced in previous studies.
Authors and Affiliations
Hesam Rahbarimagham
Keywords
Related Articles
- EP ID EP569357
- DOI -
- Views 92
- Downloads 0
Outage Probability of Cognitive Relay Network Considering the Interference from Primary Users on the Secondary Relay and Reciver
Cognitive Relay network is a plan to remove some problem such as the limited Coverage and limited spectrum. This strategy permit secondary users to use a frequency band( spectrum), which is dedicated to the primary users...
Partial Discharge Analysis in Generator Stator Winding Using Artificial Neural Network
This paper analyses the Partial Discharge (PD) on the stator terminals of synchronous generator. This is necessary to collect experimental data for the analysis. First, exploiting the measurement devices, special signals...
Design and Simulation of a New Optimized Full-Adder Using Carbon Nano Tube Technology
The full adder circuit is one of the most significant and prominent fundamental parts in digital processors and integrated circuits since it can be used for implementing all four basic computational functions including:...
Modeling of Pulsed Transformer with Nanocrystalline Cores
Recently tape wound cores, due to their excellent properties, are widely used in transformers for pulsed or high frequency applications. The spiral structure of these cores affects the flux distribution inside the core a...
Emotion Recognition of Speech Signals Based on Filter Methods
Speech is the basic mean of communication among human beings.With the increase of transaction between human and machine, necessity of automatic dialogue and removing human factor has been considered. The aim of this stud...