Optimization of Gas Well Performance through Well Capacity Prediction using Systems Analysis Approach
Journal Title: JOURNAL OF ADVANCED RESEARCH IN PETROLEUM TECHNOLOGY & MANAGEMENT - Year 2019, Vol 5, Issue 1
Abstract
Analyses of the variables that affect the performance of flowing gas wells were carried out in this project to optimize production of wells U300, U400 and U500 whose production from onset was less than 60% of the expected rate of 50MMscf/ d. The variables analyzed are tubing diameter, perforation interval, wellhead pressure, reservoir pressure and temperature, applying System analysis, which offers a means of recognizing quickly the components of the production system that are restricting its performance using Prosper 11.5 simulation software. Result from these analyses show a well potential of 1185MMscf/ d, 577MMscf/ d and 595.119MMscf/ d for wells U300, U400 and U500 respectively and an optimum gas flow rate of 50.303MMscf/ d, 69.056MMscf/ d and 50.890MMscf/ d for the three wells respectively.
Authors and Affiliations
Yikarebogha Y, Izuwa NC, Ihekoronye K K, Obah BO
Keywords
Related Articles
- EP ID EP668504
- DOI 10.24321/2455.9180.201902
- Views 106
- Downloads 0
Optimising Cost Savings on well Clean up and Test Services: Case-Niger Delta Wells
In this work, the optimisation of cost savings on well clean up and test services using Niger Delta wells as case are presented. Four wells drilled into the same reservoir are used as cases. Well clean up and test servic...
Corporate Culture and Green Human Resource Management in Selected Oil and Gas Industries in Rivers State
This study examined the relationship between corporate culture and green human resource management practices. Using data from 386 employees, randomly drawn from five selected multinational oil and gas industries in River...
Economic Analysis of Oil Rim Reservoir Development in the Niger Delta
A generic oil rim simulation was carried out to deepen the understanding of the oil rim recovery mechanism under two development options: natural depletion and water injection. A horizontal well of 1800 ft. length was us...
Mapping of Bio Technology Publications: A Study Based on Scimago Journal and Country Rank Database
This paper discusses about the Bio Technology publications and its citation available in the Scimago Journal and Country Rank data base by the authors from top 15 countries (based on publications). The relevant data are...
An Overview of the Production Potentials of Gas in Tight Sands and Shale Gas Formations Worldwide: A Key Factor for Consideration in Nigeria
As at today, Nigeria is supposed to be well positioned to generate about 40000 MW of power on a daily basis for at least 68 years from the Country’s indigenous gas reserves that is estimated at 181 Tcf. This enormous gas...