Optimizing the Cost of Manufacturing Welded Thermo-resistant Steel Pipes
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2017, Vol 24, Issue 1
Abstract
The presence of stresses in the pipes of unalloyed and low alloyed steels with characteristics specified elevated temperature (high-temperature) can be put in the pipe-Dent the deformations occurring in the welded parts and the knowledge of their size allows to appreciate the ability of the test structures welded. To remove or reduce residual stresses and consequently to dimensional stabilization of the parts, use the thermal process. Comparisons have been made regarding the di-mensional stabilization of the welded assembly by heat treatment of stress relief and dimensional stabilization by means of low frequency mechanical vibrations. Starting from the technological flow, two simula-tions were performed and the results obtained determined that the processing times were reduced in the case of vibration stabilization. The vibration stabilization system decreases thus reducing the manu-facturing costs and consumes only a fraction of the heat demanded by the heat process, being one of the processes used predominantly for large welded assemblies, the intent being capable of being chipped at the place where the process of production.
Authors and Affiliations
Lenuța Cîndea, Iuliana Zburlea, Cornel Hațiegan, Cristian Rudolf
Keywords
Related Articles
- EP ID EP445068
- DOI -
- Views 82
- Downloads 0
An Investigation about using Nanorefrigerants in Air Conditioning Systems According to the Theoretical, CFD and Experimental Review of the Recent Literature
Greenhouse gases (GHG) causing global warming and climate change. In the year 2014, 32.3 billion tones CO2 emitted to the atmosphere as the most important greenhouse gas. According to the statistics, a significant portio...
Researches Regarding the Factory Test of Electric High-duty and High voltage Equipment
This paper shows a review of the present methods of testing the high-duty and high voltage electric machines and transformers, to which the authors brought their own contributions concerning their elaboration and exploit...
Constructive Design and Dynamic Testing of the Double Harmonic Gear Transmission
The paper presents the design construction and functioning of a new type of harmonic gear transmission named double harmonic gear transmission (D.H.G.T.). In the second part of this paper is presented the dynamic testing...
Theoretic Considerations on the Influence of Elec-trode Wire Additional Preheating upon MIG – MAG Welding
The paper theoretically analyses the influence on the MIG-MAG welding process of additional preheating at the free end of the electrode wire by one or several heat sources, produced by independent current sources, and th...
Structural Considerations on Fatigue Cracks
This paper has been focused on the modern theoretical and experimental investigations on fatigue of metals which are now largely concentrated on three important areas: fatigue crack nucleation, short crack growth and lon...