Researches Regarding the Factory Test of Electric High-duty and High voltage Equipment
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2014, Vol 21, Issue 2
Abstract
This paper shows a review of the present methods of testing the high-duty and high voltage electric machines and transformers, to which the authors brought their own contributions concerning their elaboration and exploitation. We have especially presented the methods which make possible the concluding heating tests in factories and the elimination of the eventual errors which can occur at the installation place.
Authors and Affiliations
Aurel Campeanu, Gheorghe Liuba, Ion Piroi, Ladislau Augustinov, Elisabeta Spunei
Keywords
Related Articles
- EP ID EP460872
- DOI -
- Views 93
- Downloads 0
Numerical Investigation of Turbulent Forced Convection Nanofluids Inside an Annulus
Turbulent forced convection heat transfer of Al2O3-water nanofluid has been studied numerically under uniform heat flux on the inner and outer walls in an annulus with rough tubes. Solid nanoparticles diameter were consi...
Stochastic Modelling of Linear Programming Application to Brewing Operational Systems
System where a large number of interrelated operations exist, technically-based operational mechanism is always required to achieve potential. An intuitive solution, which is common practice in most of the breweries, per...
Contributions in the Preparation and Processing of Composite Material Type Silumin 3 - Reinforced Matrix with S235JR Steel Mesh
In the paper are presented concrete data on developing technological batches of metal composite material (MCM) type Silumin 3-reinforced matrix with steel mesh S235JR, with the indicating of the parameter and of the dist...
A Review of Dynamic Models Used in Simulation of Gear Transmissions
The investigation of relevant scientific literature regarding gear modeling enabled us to discover a significant number of papers dating back several decades and continuing to the present. The purpose of the dynamic mode...
A Modal Analysis Study of Thin Parallelogram Plates Clamped on the Rim with and without Defects Using the SolidWorks Program
This paper presents the study of the modal analysis of four types of plates in parallelogram shape, with or without defects, using the SolidWorks program. The results obtained after this study, have targeted the behavior...