Performances Study of a Hybrid Rocket Engine
Journal Title: INCAS BULLETIN - Year 2018, Vol 10, Issue 2
Abstract
This paper presents a study which analyses the functioning and performances optimization of a hybrid rocket engine based on gaseous oxygen and polybutadiene polymer (HTPB). Calculations were performed with NASA CEA software in order to obtain the parameters resulted following the combustion process. Using these parameters, the main parameters of the hybrid rocket engine were optimized. Using the calculus previously stated, an experimental rocket engine producing 100 N of thrust was pre-dimensioned, followed by an optimization of the rocket engine as a function of several parameters. Having the geometry and the main parameters of the hybrid rocket engine combustion process, numerical simulations were performed in the CFX – ANSYS commercial software, which allowed visualizing the flow field and the jet expansion. Finally, the analytical calculus was validated through numerical simulations.
Authors and Affiliations
Adrian-Nicolae BUTURACHE
TORNADO concept and realisation of a rotor for small VAWTs
The concept of a three-tier configuration for a vertical axis rotor was successfully developed into a experimental model. The rotor assembly is divided into three tiers with three straight blades in each tier. The three-...
Traian Vuia – the Romanian inventor who first flew a powered airplane in 1906
As observed the beginning of heavier than air devices started with Wright Brothers who flew in 1903 the first catapulted airplane equipped with an engine, similar to present motor gliders. In March 1906 took place the fi...
Overview regarding the certification of a new military jet aircraft for school and training
The requirements for designing a new Romanian school and training military jet, IAR 99 NG, are in line with the EMAR - European Military Airworthiness Requirement. The Approval Regulation for the new school and training...
[b]IAR-99 GVT CORRELATION FOR DYNAMICS STORES FEM[/b]
In this presentation, we will concentrate on typical Ground Vibration Test (GVT) and Finite Element (FE) comparisons software. It is necessary to note, that standard GVT are obligatory for any new aircraft configuration....
A Neural Network Controller New Methodology for the ATR-42 Morphing Wing Actuation
A morphing wing model is used to improve aircraft performance. To obtain the desired airfoils, electrical actuators are used, which are installed inside of the wing to morph its upper surface in order to obtain its desir...