Preparation, microstructure and oxidation resistance of SiCN ceramic matrix composites with glass-like carbon interface
Journal Title: Carbon - Science and Technology - Year 2009, Vol 2, Issue 1
Abstract
Glass-like carbon (GC) interface was successfully introduced into carbon fiber-reinforced SiCN ceramic matrix composite (C/GC/SiCN) by polymer infiltration and pyrolysis using phenolic resin as precursor. In order to highlight the Oxidation resistance of GC interface, the Oxidation behavior of GC, carbon fiber (Cf) containing approximately 0.3 μm GC coating and C/GC/SiCN was investigated by means of weight changes and residual strength ratio before and after oxidizing, and the results were also compared with that of Cf containing Pyrocarbon (PyC) coating and C/PyC/SiCN composite. Scanning electron microscopy displays homogeneous, adherent GC coating on Cf. Weight loss rate of Cf containing GC coating is lower than that of Cf containing PyC coating. The residual stress ratio of C/GC/SiCN was higher than that of C/PyC/SiCN. The results indicate that GC interface can improve anti-oxidation of Cf-reinforced composite than PyC interface.
Authors and Affiliations
Yi Xia, Sheng-Ru Qiao, Qiang-Qiang Wang, Cheng-Yu Zhang, Jun-Tao Hou
Keywords
Related Articles
- EP ID EP49870
- DOI -
- Views 230
- Downloads 0
Efficiency enhancement of wood stove integrated with catalytic combustor and modified chimney
Domestic wood combustion produces smoke that is harmful to human health and increases fine particle level in the atmosphere. Some necessary changes in the design are essential in the domestic wood stove in order to impro...
Extending the applications of BODIPY to the whole visible spectral region (Invited Review Article)
No Abstract
Magnetic susceptibility of oxygen adsorbed on the surface of spherical and fibrous activated carbon
The magnetic susceptibilities of oxygen adsorbed on the surface of bead-shaped activated carbon and activated carbon fibers were evaluated as a function of temperature between 4.2oK and 300 oK, and found to exhibit a sha...
Synthesis and characterization of composite nanofibers with VARTM and Electrospinning process
Fiber-reinforced polymer composites have made tremendous advancements in the technology of engineering materials. To manufacture advance composite, quantity and size of reinforcement and failure of the composites play th...
Eco-friendly synthesis of Graphene using the aqueous extract of Amaranthus dubius
An eco-friendly process of reduction of graphene oxide using aqueous extract of Amaranthus dubius under refluxing method is herein reported. The colour change of the graphene oxide (GO) solution from brown to black was n...