Production of Synthesis Gas from Biomass and Plastic Waste using a Updraft Gasifier
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
The capability of blend gas creation from biomass and plastic waste chip material by spending draft type fixed bed gasification innovation is examined. The reason for this examination is to explore the syngas generation utilizing biomass and plastic waste chip material in the updraft type fixed bed gasification framework. It is discovered that biomass and the plastic waste material can be effectively changed over to create the syngas comprising of carbon monoxide (CO), carbondioxide (CO2 ), oxygen (O2 ) hydrocarbon (HC) and water vapours. In this project, synthesis gas is produced by using the biomass materials using coconut shells, castor husk, sugarcane bagasse, rice husk and plastic waste with help of updraft type fixed bed gasification technology. In our investigation, coconut shells produce more synthesis gas.
Authors and Affiliations
D. Mabasha, G. Venkatesh, K. Jayasimha Reddy
Keywords
Related Articles
- EP ID EP671791
- DOI 10.24247/ijmperdoct201940
- Views 75
- Downloads 0
Aero-Structural Optimization of Aircraft Wing by Finite Element Method
New and innovative designs must be explored to meet the aircraft requirements lower weight and more cost effective structure for future airplanes. For these reasons, present study aims to deals with the structural analys...
Performance Studies on the Reversing Valve Incorporated Air-to-Water Heat Pump with Heat Storage Device
In order to avoid the rapid on and off, the condition of partial load is maintained by the heat storage device. With Plate heat exchanger in the air to water heat pump, the heat storage device is for heating along with l...
PORT DEVELOPMENT IN SUPPORTING CONNECTIVITY SYSTEM OF ARCHIPELAGO REGION
The development of port infrastructure and connectivity between ports could influence the economic improvement of natural resources potency related to the population prosperity. Therefore, port development is needed -so...
Comparing Parametric Optimization of the Machining Parameters of Al2024-Sic for MRR using Taguchi and Applied Statistical Plots
In today’s competitive world, the industries should have production systems which are capable of versatility, high production rate, precision and ability to produce highly finished goods. Due to this the value of input m...
Mechanical Characterization of Aluminum 6061 with B4c and High Entropy Alloys
Aluminum matrix-based materials are widely used in aircraft, automobile industries due to its lightweight to strength ratio. Globally, researchers focus on developing the materials with lower density with high strength....