Recycling of Hematite Fine Waste by Pelletisation
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2017, Vol 40, Issue 3
Abstract
A large volume of by-products and residues is generated during iron and steel production. Much of these represents valuable materials and can be recovered and recycled inside the flow of integrated steel plants. The fine-grained residues, which are rich in iron, are usually recycled through sinter plants. This study aims at investigating the potential of palletization of two types of hematite fine waste resulted from process of chemical pickling of steel strip. The pelletizing tests were performed in an experimental disc pelletizer. The hematite was mixed with different fluxing and binding agents. The green pellets were then dried, sintered and cooled. The effect of materials mixtures on the physical and chemical characteristics of pellets was determined and analyzed in relation with nature of pelletized components.
Authors and Affiliations
Anișoara CIOCAN, Beatrice TUDOR
Keywords
Related Articles
- EP ID EP573878
- DOI -
- Views 57
- Downloads 0
Hardened Aluminum with Discontinuous Copper Threads
The paper presents the influence of the quantity of discontinuous reinforced threads on the mechanical characteristics of some samples obtained through deformation from composite material with metallic matrix. As a raw m...
Researches on the Viscoplastic Behavior of a CrMo Alloyed Steel
The paper shows the results of the researches concerning the deformation behavior of alloyed steel with chromium and molybdenum. The plastic deformation behavior is researched in the experimental way, using the torsion t...
Study of Zro2/Co-Deposition with Cobalt from Chloride Electrolyte
The metal-matrix composites are materials in which the properties of a metallic host material are modified with addition of a second phase (ceramics) by electrodeposition process. The second phase can be hard oxides or c...
Vaporisation of the Metallic Bath Component During Refining in Oxygen Converter
The paper presents a series of researches regarding the vaporization of the component elements of the metallic bath and slag during refining in LD converter. Also, the main factors which influence the vaporization proces...
X-Ray Diffraction Residual Stress Measurements for Quality Control Testing
This paper present the primary difficulties which are associated with the obtaining and interpreting surface X-ray diffraction residual stress results: the surface stresses may be identical for the shoot peening, nitridi...