Research and control of the purity of production hydrogen with a high degree of purification when applying the electrolysis method of production
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 1, Issue 6
Abstract
<p>We conducted experimental studies aimed at determining the purity of hydrogen obtained at the electrolysis installation made by Hydrogen Technologies (Norway) at the pipe plant Centravis Production Ukraine in the city of Nikopol, Ukraine.</p><p>It was established that the determination of hydrogen purity and the degree of its purification from impurities (nitrogen) in microconcentrations involves two stages of measurements:</p><p>− research into the presence of nitrogen in the samples of production hydrogen in the microconcentrations of [[N2] 0.001−0.01 % (rough estimate);</p><p>− research into the presence of nitrogen in the samples of production hydrogen in the microconcentrations of [[N2] 0.001−0.01 % (fine assessment).</p><p>We determined that the purity of production hydrogen, obtained during research, was 99.9±0.1 %. A given value for purity does not match certification indicators for purity of production hydrogen claimed by the manufacturer to equal 99.9999 %.</p><p>We analyzed the reasons for the mismatch between the purity of obtained hydrogen and claimed characteristics. A detailed analysis revealed that the possible cause of high nitrogen concentration in hydrogen is the worn piston rings in the stage of compressor pistons, which causes the penetration of nitrogen in microconcentrations into production hydrogen. Piston rings in the compressor's stage were replaced. Repeated studies into purity of production hydrogen indicate that the purity of production hydrogen amounted to 99.99±0.01 %, which corresponds to the hydrogen of grade A.</p>
Authors and Affiliations
Valeriy Nikolsky, Olga Oliynyk, Viktor Ved, Olena Gnatko, Andrii Pugach, Iuliia Bartashevska
Keywords
Related Articles
- EP ID EP527772
- DOI 10.15587/1729-4061.2018.124085
- Views 73
- Downloads 0
Study of the method for assessing atmospheric turbulence by the envelope of sodar signals
<p class="a">The method for measuring the intensity of atmospheric turbulence based on assessment of statistical characteristics of the sodar signal envelope was investigated. This method requires no changes to the sodar...
Development of technology for the production of semifinished products with an emulsion structure based on the decalcified dairy raw materials
<p>It was determined that in a condition of meeting requirements of current normative documents, physicochemical and technological properties of the cottage cheese differ from each other which affects technological param...
Modeling analysis of the effect of the main roll-hoop length on the strength of Formula Student chassis
Chassis is a very important part of the vehicle, where the whole body of the vehicle is built. All vehicle external loads include their own weight supported by the chassis. Chassis design and analysis play an important r...
Characteristics of radiolocation scattering of the Su25T attack aircraft model at different wavelength ranges
This paper demonstrates that mathematical modeling makes it possible to build and explore radiolocation profiles of modern and advanced aircraft. Construction and studying mathematical models based on modern information...
Definition of the aging process parameters for nickel hydroxide in the alkaline medium
<p class="1">The parameters of theaging process of nickel hydroxide in thealkali medium, depending on aging time and presence of cobalt hydroxide additive, have been determined. It was revealed that theaging process is g...