RESEARCH OF RATIONAL CHARACTERISTICS OF THE DATE COMMUNICATION LINKS OF THE INFORMATION AND MEASURING SYSTEM
Journal Title: Наука та прогрес транспорту - Year 2018, Vol 0, Issue 1
Abstract
Purpose. The article focuses on determining the rational parameters of data transmission interfaces for information and measuring system for testing the hydraulic transmissions, as well as determining the degree of fault to-lerance in various operating modes of the system. Methodology. In the study the researcher has determined and theoretically calculated the main characteristics of the data transmission channels from the hardware converters of the data signals of analog sensors of technological parameters to the computer. For a more complete assessment, an imitation model was created in the MATLAB environment to study the assigned task. Analysis of the results obtained from the theoretical calculations and using the simulation data model to determine the rational settings of interfaces (rational transmission speed, rational element base, rational system structure, etc.) of data transmission makes it possible to determine the rational characteristics of the system. Findings. For the existing information-measuring system for testing hydraulic locomotive transmission of diesel locomotives, studies were carried out to determine and theoretically calculate the main characteristics of the data transmission channels from the hardware converters of data signals from analog sensors of technological parameters to the computer. To study the tachometric subsystem, an imitation model was created that allowed to investigate the main characteristics of the data transmission channels from the hardware converters of data signals of analog sensors of tachometric parameters to the computer. The results of theoretical calculations were analyzed and the rational settings of the data transmission system were determined using the simulation model of data. Originality. The study to determine and theoretically calculate the main characteristics of the data transmission channels from the hardware converters of data signals of analog sensors of technological parameters to the computer showed that the system operates in the mode of actual «non-maintenance». For more detailed studies of the processes occurring in the transmission system of tachometric data, an imitation model was created in the Matlab environment. This model allowed carrying out a number of experiments. Practical value. On the basis of experiments with the model, rational ways of solving the existing problem of the system operation in the mode of actual «non-maintenance» were established. Also, the introduction of one of the proposed methods for solving the problem or combining them requires further research in the real system
Authors and Affiliations
I. A. Kliushnyk
Keywords
Related Articles
- EP ID EP284242
- DOI 10.15802/stp2018/120156
- Views 85
- Downloads 0
РАЗВИТИЕ СИСТЕМЫ ПЕРЕВОЗКИ ГРУЗОВ ПО АВТОМОБИЛЬНОЙ ДОРОГЕ НА ОСНОВЕ ПРИНЦИПОВ ЛОГИСТИКИ
Цель. В научной работе необходимо рассмотреть развитие и адаптацию теоретико-методических основ совершенствования логистических систем доставки грузов автомобильным транспортом в рамках научного обеспечения процессов фор...
МОДЕЛЮВАННЯ ПРИСТРОЇВ ЗВ'ЯЗКУ, ЩО ЗАБЕЗПЕЧУЮТЬ БЕЗПЕКУ НА ЗАЛІЗНИЦЯХ
Мета. Відповідно до вимог стандартів до безпечного зв’язку в системах централізації (EN 50159) авторами проаналізовано ситуацію невиявлених повідомлень про помилку, яка передається через канал двійкової синхронної переда...
RESEARCH OF THE STRESS STATE OF A MODIFIED IN-SITU CONCRETE
Purpose. The article focuses on investigation of the stress state of a modified in-situ concrete of natural hardening. Methodology. To achieve the aim, the research of the microstructure of the modified cement matrix of...
ENHANCING THE SCIENTIFIC LEVEL OF ENGINEERING TRAINING OF RAILWAY TRANSPORT PROFESSIONALS
Purpose. Publication of the results of international scientific and technical cooperation of the Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan (DNURT, Ukraine) and the Czech...
RESEARCH OF LOCOMOTIVE MECHANICS BEHAVIOR
Purpose. The main purpose of the study is to compare and confirm the results of theoretical studies of locomotive motion along the straight and curved track sections in the set range of operating speeds, which is essenti...