Research on the Matching Relationship between Backflow Device and Special Rail of Urban Rail Transit Vehicles
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 8
Abstract
Objective The stray current generated during the operation of urban rail transit vehicles with rail backflow method will cause electrical corrosion to nearby metal objects, while the special rail return mode can solve such problems. It is necessary to comprehensively analyze the matching relationship between the backflow device of urban rail transit vehicles and the special rail. Method Based on the structural parameters of bogies, backflow devices, running rails and special rails of urban rail transit vehicles, as well as their suspension parameters and gauges, a vertical and horizontal dimensional chain analysis method is innovatively established by analyzing the structural matching characteristics between the backflow device and the special rail. The spatial size matching relationship between the vehicle backflow device and the special rail of an urban rail transit vehicle under six working conditions is checked. The vehicle dynamics simulation model with backflow device is established by SIMPACK simulation software. Whether the vertical contact pressure between vehicle backflow device and special rail is within a reasonable range during train operation is analyzed under four working conditions. Result & Conclusion The checking of the spatial size matching relationship between the vehicle backflow device and the special rail shows that partial structure of the backflow device needs to be adjusted. Simulation analysis verifies that the vertical contact pressure between the vehicle backflow device and the special rail is within a reasonable range.
Authors and Affiliations
Yuanqing HUANG, Yumin LIU, Dongpo LIU, Xiaoli CHEN
Keywords
Related Articles
- EP ID EP742720
- DOI 10.16037/j.1007-869x.2024.08.049
- Views 52
- Downloads 0
Influence of Back-Support Shear Wall for Shield Launching on the Mechanical Characteristics of the Reaction Frame
Objective Due to the limited space available at the shield launching site, the restricted size of the reaction frame cannot provide sufficient shield launching reaction force on its own. Therefore, it is necessary to des...
Adaptability of Medium-low Speed Maglev System in City (Suburban) Railway
Objective Addressing the current issues of relatively limited system choices, large engineering investment, and high proportion of underground lines, the adaptability of medium-low speed maglev lines in city (suburban) r...
Thinking and Practice of Urban Rail Transit Safety Resilience
Objective As an important transportation infrastructure, urban rail transit is crucial to ensure safe and orderly operation of the city. In order to cope with the safety challenge faced by urban rail transit system, it i...
Toe Load Detection and Test Verification Based on the Natural Frequency of Fastener Elastic Rod
Objective The insufficient toe load of the fastener elastic rod will induce loosening of the surrounding fasteners, aggravate the dynamic response between wheels and rails, affecting the service life of the track compone...
Shear and Seismic Performance Analysis of New Component Connection Schemes for Urban Rail Transit Prefabricated Underground Stations
Objective To further promote the application of underground prefabricated structures in urban rail transit projects, research on key technologies (especially new component connection schemes) is conducted for the entry/e...