RESEARCHING AND MODELING OF THE DYNAMIC VISCOSITY OF THE FERRO-OILS WITH THE DIFFERENT CONCENTRATIONS OF MAGNETIC PARTICLES IN THE ASPECT OF PRESSURE CHANGES
Journal Title: Tribologia - Year 2017, Vol 272, Issue 2
Abstract
In this article, the results of the experimental research of determining the dynamic viscosity of the ferro-oils with different concentration of the magnetic particles in terms of pressure change are presented. The research was conducted on the Thermo Scientific Haake Mars III rheometer in the configuration with a pressure chamber. The applied configuration allowed the author to conduct research on the change of viscosity for the selected pressure values p in range from 0 to 100 bars. The research was conducted for three selected temperature values, including t = 30°C, 60°C, and 90°C, as well as selected shear rates of 200 and 600s-1. The chosen concentration values of the magnetic particles were nCS = 1%, 2%, 4%, 6%, and 8%. The viscous characteristics gathered as a result of the research have been analysed with the aim of identifying the nature of the correlations and to create mathematical-physical models of changes in the dynamic viscosity of the ferrooils due to the change in pressure in terms of concentrations of the magnetic particles. Analysis, identification, and adaptation of the characteristics were conducted using the StatSoft STATISTICA ver. 9 software. Selected mathematical adaptations of the acquired results were submitted through the enhanced analysis. In addition, parameters of the course of functions were designated and their qualitative assessments were made.
Authors and Affiliations
Marcin FRYCZ
Keywords
Related Articles
- EP ID EP239549
- DOI -
- Views 52
- Downloads 0
EVALUATION OF ELECTRON BEAM IRRADIATION EFFECTIVENESS IN VIEW OF INCREASING WEAR RESISTANCE OF GUR 1020 AND GUR 1050 POLYETHYLENES USED FOR ENDOPROSTHESIS CUPS
Radiation modification was conducted in order to increase the resistance of GUR 1020 and GUR 1050 polyethylenes to plastic deformation and abrasive wear. Electron irradiation of 26-156 kGy dose was applied. It was determ...
THE INFLUENCE OF LASER HEAD SPEED IN THE PROCESS OF LASER HARDENING ON THE TRIBOLOGICAL PROPERTIES OF SURFACE LAYERS
The paper presents the results of research on the tribological properties of steel 16MnCr5 after laser hardening. The quality of the hardened surface was influenced by laser head speed. The study was conducted on frictio...
THE TESTING OF EXPLOITATION PROPERTIES OF ECOLOGICAL GREASES MODIFIED WITH POLYMER-SILICA ADDITIVE
In this article, the investigation results of the influence of developed additive AR (silica and polymer) on the change of rolling contact fatigue bearings lubricated with an ecological composition of grease are presente...
Własności tribologiczne natryskanych naddźwiękowo powłok węglikowych modyfikowanych obróbką elektroerozyjną
W pracy podjęto próbę wytwarzania przeciwzużyciowych warstw powierzchniowych hybrydową metodą naddźwiękowo-elektroiskrową. Powłoki z WC12Co i WC17Co zostały naniesione systemem do natrysku naddźwiękowego TAFA–JP-5000. Mo...
OPTIMISING TRIBOLOGICAL PROPERTIES OF ANTI-WEAR AlCrN COATINGS DEPOSITED BY THE CATHODIC ARC METHOD
The Taguchi method was applied to achieve the optimum anti-wear performance of AlCrN hard coatings deposited by the cathodic arc evaporation technique. Four deposition processes parameters i.e. nitrogen pressure, arc cur...