РОЗРОБЛЕННЯ ЕКСПЕРИМЕНТАЛЬНОГО УСТАТКУВАННЯ ДЛЯ ВИМІРЮВАННЯ ТЕМПЕРАТУРИ РОЗПЛАВУ МЕТАЛУ ОПТИЧНИМ СПОСОБОМ
Journal Title: Вимірювальна техніка та метрологія - Year 2018, Vol 79, Issue 4
Abstract
Two main methods of contact measurement of steel temperature are applied in industry: with help of disposable and multiple used thermotransducers. Reusable ones are fixed to the bottom of the graphite tip fixed directly on the reinforcement. Then they are able to measure the temperature of the graphite surface. Since it needs to even the graphite temperature and the temperature of the melt metal, the measuring takes some extra time. Therefore the thermotransducer is mounted in the metal for a long time. Disposable thermotransducers are placed in a quartz cylinder, which prevents the premature destruction of it. They are equipped with a thin protective metal tip that melts when the thermotransducer is penetrating the slag layer. So further the thermotransducer contacts directly with the melt metal as far as the completion of temperature measurement or destruction of the used measurement unit. The author suggests considering both these methods and tries to apply them within proposed pyrometric method. The first method is based on measuring of the surface temperature of the graphite tip in a closed space. The second one consists in measuring the temperature of melt metal that can contact with measuring unit (sensitive part of construction) after the destruction of the protective cap. The advantages of the first method are that the same probe can be used multiple times, in fact until complete destruction. The advantages of the second method consist in the direct optical contact between the metal surface and the pyrometer. The considered method is promising since it gives the possibility of contactless measurements of the temperature of melt metal within blast furnaces as well as lowering the cost of the measurement process at the metallurgy. In addition, the research envisages that the implementation of this method anticipates the subsystem for the removal of vapors from the closed protective cover that significantly affect the measurement results.
Authors and Affiliations
Gennadiy Petrychenko
Keywords
Related Articles
- EP ID EP533215
- DOI 10.23939/istcmtm2018.04.025
- Views 85
- Downloads 0
АДАПТИВНІСТЬ ЧИННОЇ НОРМАТИВНОЇ БАЗИ УКРАЇНИ ДЛЯ ЗАВДАНЬ ОЦІНЮВАННЯ ВІДПОВІДНОСТІ ЗГІДНО МІЖНАРОДНИХ ВИМОГ
The structure of forming the requirements to the estimated objects according to international and national rules of technical regulation has been sifted; their comparison analysis has been made. It is revealed that impro...
КОНТРОЛЬ ЯКОСТІ ПИТНОЇ ВОДИ ЗА ЕЛЕКТРИЧНИМИ ПАРАМЕТРАМИ
In the article it is investigated the method of quality control of drinking water on the electrical parameters with the use of two electrode electrolytic cell. Is carried out the analysis of equivalent circuit and the er...
ХАРАКТЕРИСТИКА СКЛАДОВИХ КОНЦЕПЦІЇ ПІДГОТОВКИ МАГІСТРІВ ЗА СПЕЦІАЛЬНІСТЮ «ЯКІСТЬ, СТАНДАРТИЗАЦІЯ ТА СЕРТИФІКАЦІЯ» У НУБІП УКРАЇНИ
In article analysed the conception constituents of preparation of master's degrees of speciality is conducted «Quality, standardization and certification». Conceptual basis of preparation of master's degrees consists in...
КЛАСИФІКАЦІЯ ДАНИХ ОБЛІКУ ЕЛЕКТРИЧНОЇ ЕНЕРГІЇ
Electricity metering data management understands the consistent conversion of measurement results into commercial metering data, in particular, aggregated, verified and validated in accordance with the established proced...
КОНЦЕПТУАЛЬНА МОДЕЛЬ ОЦІНКИ ЕКОЛОГІЧНОГО РИЗИКУ НА ОСНОВІ ІНФОРМАЦІЙНИХ ТЕХНОЛОГІЙ ВІДБОРУ І ОБРОБКИ ПАРАМЕТРІВ ВОДИ
A conceptual model of ecological risk based on information selection technology and processing of water parameters, as a technological resource of energo-active objects was designed, based on complex monitoring structure...