Static calculation of the dynamic deflection elements for separation devices
Journal Title: Журнал інженерних наук - Year 2017, Vol 4, Issue 2
Abstract
The following paper considers the influence of acoustic oscillations on multiphase flows on their suspended particles, which can be destroyed or coagulated by vibrations. Considering this, the method of extension of application range of the dynamic separation element as vibrocoagulants due to the use of hydroaeroelasticity phenomena, namely flutter, has been proposed. There were considered the problems of development an engineering method for calculating dynamic separation elements, the main of which is the analytical solution of the hydroaeroelasticity problem. This work takes the first step to its development, considering the previous elastic elements deformation that has a significant effect on the flutter frequency. The state of their static equilibrium was conducted with the use of analytical dependencies of the finite element method. The bimodal finite elements with six degrees of freedom were used for dynamic deflection elements. As the result, there was determined the stiffness of pre-deformed plates and their maximum and minimum possible deflections. The functions of the median surface deflection in the form of a cubic polynomial were used in the model. In particular, there were considered the peculiarities of numerical modelling of coupled problems of gashydrodynamics flows and structural dynamics using the ANSYS Workbench, namely Fluent Flow and Transient Structural modules, which are combined with System Coupling. Also, the peculiarities of different approaches to multi-phase flow modelling are indicated. They are interesting not only by distribution of particles in the stream core, but also by the entrapped liquid film motion on the deposition surfaces.
Authors and Affiliations
I. V. Pavlenko, O. O. Liaposhchenko, M. M. Demianenko, O. Ye. Starynskyi
Keywords
Related Articles
- EP ID EP249690
- DOI 10.21272/jes.2017.4(2).b19
- Views 90
- Downloads 0
Learning control system of lifting machine motors
Process automation control by diagnostic electric motors in operation conditions allows to reduce to a minimum the damage from these consequences due to early detection of defects. The theory of diagnosticof lifting mach...
Analytical determination of the frequency of short circuits of the arc at surfacing in gas dioxide with welding pool mechanical oscillations
A hypothesis has been put forward that it is possible to reduce the degree of splashing when sur-facing into carbon dioxide due to the setting of the frequency characteristics of the oscillation of the weld pool. Equatio...
Improvement of the Vacuum Cooling System for Biodiesel Production
The article deals with the actual problem of improving the vacuum cooling efficiency systems during the biodiesel production by using vacuum devices account for the liquid-vapor ejector, which operates on the principle o...
Analysis of Technogenic Load of Oil and Gas Production on Caspian Region
The problem of intensive pollution of the Caspian Sea has been continued to be one of the most significant and serious for the region. The rising of pollution level of the Caspian Sea coast with oil hydrocarbons has a pa...
Kalman Filter Based Controlled Online System Identification
In the development of model predictive controllers a significant amount of time and effort is necessary for the development of the empirical control models. Even if on-line measurements are available, the control models...