Strength Change Mechanism of Undisturbed Red Clay and Remolded Red Clay
Journal Title: 河南科技大学学报(自然科学版) - Year 2019, Vol 40, Issue 3
Abstract
In order to study the strength characteristics and influencing mechanism of red clay, direct shear tests were carried out on undisturbed soil samples and remolded soil samples under different normal stresses σ.Scanning electron microscopy ( SEM) was used to compare and analyze the differences of microstructure between the undisturbed soil and remolded soil, such as particle unit contact, joint state, pore morphology and distribution. The influence mechanism of soil microstructure on macroscopic mechanical properties was revealed. The results show that when σ is less than the critical stress, the τof the undisturbed soil is higher than that of the remolded soil, otherwise, the undisturbed soil τis lower than the remolded soil.τThe critical value depends on the void ratio of the soil. The larger the void ratio is, the larger the critical value is. The cohesive force of the undisturbed soil is higher than that of the remolded soil, and the internal friction angle is lower than that of the remolded soil. There are significant differences in the mechanical properties between the remodeling soil and the undisturbed soil. The magnitude of the difference depends on the microstructure of the undisturbed soil. The concept of “closed pores and open pores”of red clay is proposed and applied to the mechanism analysis of shear strength of red clay, which has certain engineering guiding significance.
Authors and Affiliations
Jiayu CHEN, Zhikui LIU
Application of Deep Boltzmann Machine to Image Fusion
Aiming at the problem of insufficient feature information extraction during the fusion course of visible light and infrared images, the fusion method for visible light and infrared images based on non-subsampled shearlet...
Sliding Friction and Wear Experiment of Wheel-Rail Materials
Taking the wheel CL60 steel and the rail U71 Mn steel as the research object, the sliding friction wear test of the wheel-rail materials was performed by using the pin-disk friction wear tester under different conditions...
Preparation and Conductivity of Polymer Decorated Graphene Film
1
Study on Anti-Winding Performance of Tangential Flow Cylinder for Long and Thin Tenacious Haulm
For the problem that threshing cylinder was winded by oat stem during threshing process, a new type of tangential flow cylinder test bed was designed under the premise of guaranteeing threshing capacity of threshing cyli...
Solvothermal Synthesis and Optical Property of PbTe Nanocrystals
Lead telluride ( PbTe) nanocrystals were synthesized by solvothermal reaction method.The structure and composition of PbTe nanocrystals were characterized.The effects of reaction temperature on the morphology was investi...