Stress Analysis of A Splice Joint in an Aircraft Fuselage with the Prediction of Fatigue Life to Crack Initiation
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
The objective of this dissertation is to Stress analysis and prediction of fatigue life to crack initiation in an in a transport aircraft fuselage. Typical splice joint panel consisting of skin plates, doubler plate is considered for the study. Aluminium alloy 2024-T351 material is considered for all the structural elements of the panel. A two dimensional finite element-analysis will be carried out on the splice joint panel. A panel consisting of a splice joint of a fuselage is considered for the linear static analysis, and then applying loads and boundary conditions on it. Cyclic pressurization loading is considered.
Authors and Affiliations
Suresh R, Shyamsunder N, Devendra Reddy M
Keywords
Related Articles
- EP ID EP656580
- DOI 10.24247/ijmperdaug201992
- Views 85
- Downloads 0
Stress Analysis of Structural Components of Biomimetic Autonomous Subsea Vehicles
Biologically inspired autonomous subsea systems are recently being developed, for oceanographic and underwater explorations. The profile of aquatic animals offer least resistance to mobility in marine habitats and is bei...
EFFECT OF CUTTING SPEED ON GENERATION OF HEAT AT WORK-TOOL INTERFACE OF COPPER BASED SILVER AND BRASS ALLOYS
Copper and its alloys are extensively used in various electrical and other industrial applications, due to its high thermal and electrical conductivity. The machinability of copper depends on its alloying elements and it...
Model Order Reduction of Bolting and Feasibility Evaluation
The main idea in the present age, is to improve efficiency of computation, by reducing computational space and time eventhough, we have high end computing power. It is still preferred to use minimum computation time and...
Studies in Surface Finishing of Inconel718 Flat Surface with Magnetic Abrasive Finishing
With technological developments in manufacturing industry, very hard and tough materials are being developed. Inconel 718 is one such material, which is a nickel based super alloy having high temperature and high-pressur...
Analysis of Tube Failure in Economizer and Super Heater Tube in Thermal Power Station
Boiler tube failure continues to be the leading cause for forced outages in fossil fired boiler. The tube failure may be a simple problem, unless it causes damage to the power plant and affects safety of the human being....