Study of the influence of oxidizing parameters on the composition and morphology of Al2O3•CoOx coatings on AL25 alloy
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 12
Abstract
<p>The influence of operating parameters of plasma-electrolytic oxidation in diphosphate cobalt-containing electrolyte on the process of formation of oxide coatings on alumosilicon alloy AL25 (GOST 1583) was studied. It was shown that inclusion of cobalt into the composition of surface oxide layers leads to a change of morphology and topography of the surface. Variation of current density and PEO time allows flexible control of the process of incorporation of the catalytic component into the matrix of oxide of basic metal. It was shown that at an increase in oxidation time, cobalt content in the surface oxide layer increases.</p><p>The rational mode of plasma-electrolytic treatment of piston alloy in diphosphate electrolyte for obtaining oxide coatings, enriched with cobalt, was substantiated. It is advisable to perform formation of PEO-coatings on AL25 with developed globular-mosaic surface, maximum cobalt content, with minimizing impurities in the range of current densities of 3–5 A/dm<sup>2</sup> within 20–40 min. The obtained cobalt-containing oxide coatings can be used in the air and water purification systems, specifically, for intracylinder catalysis of gas emissions of internal combustion engines.</p>
Authors and Affiliations
Ann Karakurkchi, Mykola Sakhnenko, Maryna Ved'
Keywords
Related Articles
- EP ID EP527941
- DOI 10.15587/1729-4061.2018.128457
- Views 56
- Downloads 0
Determining the characteristics of diffracted sea waves of finite amplitude around a vessel in considerable shallow waters
<p>Vessels at shallow-water outer anchorage are exposed to a complex system of waves. This system results from the diffraction of sea-incident waves against a ship. When entering shallow waters, three-dimensional waves t...
Improving the diagnostics of underground pipelines at oilandgas enterprises based on determining hydrogen exponent (PH) of the soil media applying neural networks
<p>A set of key parameters and information flows has been formed to simulate stages of probing the outside surface of underground metal pipelines (UMP) taking into account pH of the soil contacting with the pipe metal.</...
Development and substantiation of the technology for producing structured olives containing the encapsulated olive oil
<p>The technology of the production of structured olive containing the encapsulated olive oil was developed and substantiated. The technology is based on the structuring methods with the use of ionotropic polysaccharides...
Determining high quasihydrostatic pressure up to 7 GPa at a temperature to 1,400 °С using resistive sensors
<p>A differential method for measuring high quasi‒hydrostatic pressures for six‒punch pressing installations has been constructed by building a load‒carrying characteristic р=f(Q), where p is the value for pressure in a...
The analysis of friction effect on equal channel angular pressing (ECAP) process on Aluminium 5052 to homogeneity of strain distribution
<p class="SDRMText">In the current study, the effect of friction coefficient on strain distribution and deformation was investigated with the computer simulation providing a better understanding of the material flow mech...