Study on the Static Mechanical Properties of Blind End Riveting Connection between Steel Panel and Three-dimensional Braided Carbon Fiber Panel
Journal Title: Automobile Technology & Material - Year 2024, Vol 39, Issue 1
Abstract
Static mechanical properties of blind end riveting connection between steel panel and three-dimensional braided carbon fiber panel was studied. The static test of blind end riveting connection combination with two different material thicknesses with the same specimen width and end distance was carried out. Then, the static test was carried out on the blind- end riveting connection combination with the same material thickness with different specimen width and end distance, so as to study the influence of mechanical property, failure mode, specimen width and end distance on its static performance. The research shows that good mechanical properties can be obtained by using blind end rivet to connect steel panel and carbon fiber panel. The failure mode and the maximum failure load of the connection are related to the cutting direction of the three-dimensional braided carbon fiber panel. The specimen width and the end distance have an effect on the failure mode and the maximum failure load of the connection.
Authors and Affiliations
Zhang Rui, Zhang Chi, Wang Di
Keywords
Related Articles
- EP ID EP731932
- DOI 10.19710/J.cnki.1003-8817.20200374
- Views 63
- Downloads 0
Weld Characteristics and Properties of Laser Wire Filling Welding for Thin-Coated Hot-Formed Steel
To reduce the adverse effect of aluminum silicon coating layer on the surface of steel plate on laser joint, laser wire filler welding joint with aluminum mass fraction less than 1% in weld was obtained by using thin-co...
Analysis of Aluminum Stud Welding Quality Affected by Magnetic Blowing Based on ANSYS
In order to solve the problem of poor welding quality and frequent falling off of aluminum studs for a vehicle, this paper simulated the magnetic field and electromagnetic force generated in the welding process by ANSYS...
Research on the Formaldehyde Emission of Automotive Interior Parts
In order to find the source of formaldehyde emission from automobile parts at high temperature, the research team, by simulating the formaldehyde emission test of the automobile parts under high temperature conditions,...
Research and Application of Traceability Technology for Stamping Parts
In order to achieve traceability management of quality issues in stamping parts, the structure,principles, and advantages and disadvantages of mold mechanical coding technology and equipment laser coding technology were...
Nonlinear Optimization Design of Extruded Aluminum Sill Based on ESL Method
For the forward design of extruded aluminum door sill section in side pole crash condition, this paper analyzed the pros and cons of the Equivalent Static Load (ESL) based nonlinear optimization and traditional optimizat...