System automatycznej kontroli parametrów toru nadawczo-odbiorczego stacji radiolokacyjnej
Journal Title: Problemy Mechatroniki. Uzbrojenie, lotnictwo, inżynieria bezpieczeństwa - Year 2017, Vol 8, Issue 4
Abstract
W artykule przedstawiono stanowisko, które pozwala na zdalne, automatyczne przeprowadzenie kontroli oraz strojenia analogowego toru nadawczo-odbiorczego stacji radiolokacyjnej. Na potrzeby opracowanego rozwiązania zaadaptowano istniejące rozwiązania zdalnego, wielokanałowego rejestratora sygnałów [1].
Authors and Affiliations
Stanisław ŻYGADŁO, Krzysztof KOWALIK
Keywords
Related Articles
- EP ID EP246209
- DOI 10.5604/01.3001.0010.7324
- Views 65
- Downloads 0
Comparison of Effectiveness of Antiaircraft Missile Homing Controlled by Rotary Executive System
In this paper, the numerical comparative analysis of antiaircraft missile homing was carried out. The controlling of this missile flight was realized by means of rotor made of high density material, jointly mounted insid...
Use of Graphene for Shaped Charge Liner Materials
The paper presents some selected results of tests performed as part of a research task titled "Use of graphene and new multilayer explosive material technologies in shaped charge liner materials". The main aim of the ex...
Use of Standard Meteorological Messages to Simulate the Flight of 35 mm TP-T Projectile Under Actual Conditions
The paper presents a method of using actual atmosphere parameter data contained in meteorological messages, necessary for numerical calculation of a spin-stabilised projectile trajectory. Three standard meteorological me...
Simulations of the Gasodynamic Flow Induced by Air Discharge Ejectable from the Barrel by the Projectile
In the paper, the results of numerical simulations of air flow from the barrel of ejectable by the movement of the projectile during the shot on the parameters of air flow in the barrel before the bullet are presented. T...
Method of σ = σ (ε) Curve Determination Considering Stiffness of Testing Machine
The tensile test is a basis to determine strength properties in the constructional materials. The most important strength properties of materials are: yield point, ultimate strength, and Young’s modulus. The contemporary...