Target detection in pulse-Doppler radar based on multi-scanning signal integration
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2013, Vol 0, Issue 53
Abstract
Introduction. Development of multi-scanning signal integration algorithms for pulseDoppler radars which are widely used in practice is of great practical importance. Problem statement. The problem of multi-scanning signal integration measuring range and range-rate is considered. The reflected signal from a target is a distorted white noise coherent packet of radio pulses with random initial phase and known amplitude. Target detection in a sequence of radar scans is reduced to the detection of target track. Development of a two-step multi-scanning incoherent signal integration algorithm. Two-step integration method is applied to reduce the number of tracks. In the first stage the initial signals detection with a sufficiently high probability of false alarm is performed. In the second stage the tracking problem for selection target markers is solved and the multiscanning signal integration is implemented. It provides an optimal target detection solution over K surveys with low signal-to-noise ratio. Expressions for the correct target detection probability and false alarm incorporating quality track tracking are obtained. Simulation results. Analysis of the algorithm is carried out as example of the little maneuvering target detection using the statistical modeling. The methods of calculating the output threshold (the cumulative statistics are compared on it) is presented. Conclusions. Increasing the number of scans (in which the integration are performed) leads to a significant decreasing the probability of false alarm, which allows to increase the signal-to-noise ratio compared with the detection in a single scan up to 3.5 dB.
Authors and Affiliations
O. Neuimin, S. Zhuk
Keywords
Related Articles
- EP ID EP309087
- DOI 10.20535/RADAP.2013.53.89-97
- Views 79
- Downloads 0
Determination of the functional state of the fruits by parameters of the electric impedance
Introduction. To assess the freshness of various products are often used measuring impedance module. But due to the structure of plant foods diagnostic value should have exactly a complex component of impedance. Article...
Optimization methods of designs of radioelectronic modules
The methods of designing of radioelectronic modules as printedcircuit-boards are considered which should ensure identical reliability of a design on conditions vibration strength and thermal mode of radioelectronic compo...
Conditional deconvolution ща image in the domain of spatial own frequencies
Offered methods of the carrying the algorithm restorations by method Conditional deconvolution in the domain of spatial own frequencies
Dynamics of Bioimpedance Parameters on Three Frequencies During Ultrafiltration
Background/Aim. At present, methods based on the analysis of non-invasively measured parameters of electrical bioimpedance for the diagnosis of the patient's biohydrality are of interest. The purpose of this article is t...
The relationship between RTF and Fourier transform
The algorithms of transition from RTF transform to Fourier transform and vice versa in different representations of functions of the linear system (in the form of a rational function, impulse characteristic and frequency...