Test on Creep Characteristics of Remolded Loess Under High Stress
Journal Title: 河南科技大学学报（自然科学版） - Year 2018, Vol 39, Issue 3
Abstract
The high loess-filled embankment in Yan'an area was taken as research object. The high pressure consolidation creep tests were carried out under the control of moisture content and compaction degree. Theeffects of initial moisture content, compaction degree and consolidation pressure on the creep characteristics of the remolded loess were studied. A creep model that suitable for describing the post-construction settlement of high loess-filled embankment in Yan'an area was obtained by using logarithmic function fitting. The results show that the creep of soil is reduced by decreasing initial moisture content or increasing compaction degree, so the post-construction settlement of high loess-filled embankment is controlled better. With the increase of consolidation pressure, the samples need more time to reach stability. Under the condition of maximum consolidation pressure ( 2 400 kPa) , the stability time of creep is about 4 times as much as that under the low consolidation pressure ( 100 kPa) . The creep characteristics of high loess-filled embankment in Yan'an area can be reflected better by the constitutive model.
Authors and Affiliations
Jinhua LI, Huaqiang FANG, Shide WU
Keywords
Related Articles
- EP ID EP464890
- DOI -
- Views 79
- Downloads 0
Preparation and Characterization of Activated Carbon Derived from Lotus Root Residue
The activated carbon was prepared by using lotus root residue as raw material based on the in-situ physical activation effect resulting from papermaking white mud.The effects of papermaking white mud dosage, activation t...
Fatigue Fracture and Microstructure of TC11 Titanium Alloy after High Cycle Fatigue at Room Temperature
The fatigue fracture and microstructure near the fatigue fracture of TC11 titanium alloy after high cycle fatigue were analyzed by means of optical microscope ( OM) , scanning electron microscopy ( SEM) and transmission...
Effect of Borax on Moisture Absorption and Slag Removal of Sintered Stainless Steel Flux
The stainless steel sintered flux containing borax was prepared by adding borax to the formula of austenitic stainless steel sintering flux, and the welding was carried out on austenitic stainless steel. The moisture abs...
Dissolving Behavior of Lignin in Polyethylene Glycol Aqueous Solvent
The eco-friendly and simply preparation solvents ( polyethylene glycol/H2O systems, PEG-200/H2O) were developed by PEG-200 and water blending method for dissolution of lignin without heating. When the mass ratio of water...
Electro-hydraulic Braking Actuating System of Electric Vehicle
To make the electric vehicle recover more energy during braking,a new hydraulic braking actuating system of electric vehicle was designed. When electric cars were braked in low strength,the mechanical friction braking fo...