The analysis of contributing factor and the solution measure to cracks <br /> in components of ports<br />
Journal Title: Science Paper Online - Year 2006, Vol 1, Issue 5
Abstract
It is an important and urgent problem that how to effectively control the cracks of structural members of ports now. The cracks change the appearance and destroy the function of components. Engineering will suffer heavy losses without considering the mechanism of cracks. Besides the experience at present, we should take deep analysis of the contributing factor and specific property to effectively and economically reduce the appearance of the cracks.
Authors and Affiliations
Songhua Shi
Keywords
Related Articles
- EP ID EP149771
- DOI -
- Views 91
- Downloads 0
Analysis of critical global energy error limit of gravity dam stresses using adaptive finite element method
In this paper, the research on energy error limit of gravity dam stress analysis using adaptive finite element method (FEM) has been carried out. Through the stress analyses in many types of gravity dams with different d...
Reservoir-processing analysis and the development of pressure in Upper Paleozoic of Ordos Basin
This article takes a dynamic analysis, comprehensive research and theory of basin forming, hydrocarbon generation and hydrocarbon accumulation. Through the detailed analysis about sedimentary burial history, hydrocarbon-...
h-型自适应有限元法计算重力坝应力的<br /> 能量误差控制标准<br />
鉴于目前重力坝有限元计算仍没有相应应力取值标准，本文应用自适应有限元法，通过对L型板和重力坝进行多种情况下的线弹性自适应计算，提出了基于h-型自适应有限元法的全域能量误差限控制标准。算例表明，自适应计算不会因角缘应力集中而...
Thermo-optical switch based on optical fiber coupler coated with sol-gel film
A simple thermo-optical switch was demonstrated. The fiber coupler was coated with organic-inorganic sol-gel material which had high thermo-optical coefficient. With the variation of temperature, the refractive index pro...
Functionalization of vinyl cubic Ia3d mesoporous silica for immobilization of penicillin G acylase
Vinyl cubic Ia3d mesoporous silica (V-CIMS), prepared by co-condensation method, was epoxidized by m-Chloroperbenzoic acid to epoxy group-functionalized mesoporous silica (E-CIMS). The above mesoporous silicas were chara...